Overview
The Body Armor 4×4 TC-2961 is a rear bumper for the Toyota Tacoma, finished in textured black powder coat. Its contoured lines follow the factory bumper design, and the OEM trailer hitch is retained.
The bumper comes with new frame brackets of 3/16-inch plate. It attaches through eight grade 8 bolts reinforced by a 1/4-inch thick steel plate, with recovery shackles.
Key features
- Contoured lines to fit the factory bumper design
- Retains the OEM trailer hitch
- New frame brackets of 3/16-inch plate
- Attaches through eight grade 8 bolts
- 1/4-inch thick steel plate reinforcement
- Recovery shackles with shackle mounts
- Pre-drilled license plate mounting holes
- Swing arm tire carrier option, TC-5293, added through the included mount points
Rear bumper upkeep and load
A rear bumper takes repeated impacts, road salt and trail debris, so it wears in a different way than the rest of the vehicle. Powder coat protects the steel, but chips expose bare metal, which can rust if left alone. Touching up small chips early keeps the finish intact.
Recovery shackles and the trailer hitch carry loads that the bumper must transfer to the frame. Check the frame brackets, eight bolts and reinforcement plate after rough trail use, and retighten any fastener that has loosened. Shackles should be rated for the recovery force you plan to use.
If you add a tire carrier or other accessory, confirm the added weight does not exceed what the hitch and frame can handle, and check that the bumper still clears the body at full articulation.
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | TC-2961 |
| UPC | 859909002420 |
| Finish | Textured black powder coat |
| Frame brackets | 3/16-inch plate |
| Reinforcement plate | 1/4-inch thick steel |
| Mounting bolts | Eight grade 8 bolts |
| Receiver hitch | Yes, OEM hitch retained |
| Tire carrier | Not included |
| D-ring mount | Not included |
| Fitment type | Direct fit |
Vehicle fitment
This bumper is for the Toyota Tacoma. Confirm your truck’s model year and generation before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is a bolt-on job. If you add the TC-5293 tire carrier, its swing arm mount points replace the shackles.
What’s included
The bumper comes complete with new frame brackets.
Not included: the TC-5293 swing arm tire carrier and the D-ring mount.








