Overview
The Poison Spyder TJSPECIAL08 is a front and rear bumper pair, the BFH front bumper and the BFH II rear bumper, made from bare 3/16″ plate steel. BFH stands for “Built For the Hammers”, Poison Spyder’s name for a design aimed at strength, light weight and trail performance.
The front bumper is cut from one piece of high strength plate, is no wider than the Jeep’s frame rails and has angled facets to help it slide over rocks. It has an integrated winch mount and a Brawler Bar stinger. The BFH II rear bumper is a frame cap style that hugs the Jeep’s rear frame and crossmember, with shackle tabs welded inside and outside the shell.
Key features
- BFH front bumper cut from a single piece of 3/16″ plate steel
- Integrated winch mount in a one-piece design
- Angled facets help the bumper slide over rocks
- Brawler Bar stinger extends 7.4″ forward and is 9.8″ high
- BFH II rear bumper in frame cap style for obstacle clearance and departure angle
- Recovery shackle tabs from 1″ thick plate steel for 3/4″ shackles
- Rear bumper uses captured grade-8 hardware and the existing bumper mounting holes
Winch and recovery setup
A front bumper with an integrated winch mount places the winch close to the grille, so the mount decides how the pull reaches the frame. Match the winch to the vehicle’s weight and the kind of trail work expected, and confirm the mount and frame can carry that load before adding a rated winch.
Fairlead, cable and hook choices change how the winch works in practice. A roller fairlead guides the line smoothly, while a hawse fairlead suits synthetic line. Keep the line free of kinks, and inspect the bumper tabs and welds after each heavy pull, since a shock load can loosen fasteners or crack a weld.
- Use a fairlead rated for the winch
- Keep the cable spooled evenly
- Recheck fasteners after the first pull
Specifications
| Brand | Poison Spyder |
|---|---|
| Part number | TJSPECIAL08 |
| UPC | 700007616911 |
| Type | Front and rear bumper set |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Front width | No wider than the frame rails |
| Brawler Bar projection | 7.4″ forward, 9.8″ high |
| Shackle tab stock | 1″ thick plate steel, for 3/4″ shackles |
| Rear hardware | Grade 8, captured |
Vehicle fitment
The front bumper is no wider than the frame rails, and the rear bumper hugs the frame and rear crossmember. Confirm fit for your vehicle’s year, model and trim before ordering.
Compare the bumper mounting points with your frame and crossmember before purchasing. Confirm fit for your Jeep’s year, model and trim before ordering.
Installation notes
The BFH II rear bumper installs with captured grade-8 hardware in the Jeep’s existing bumper mounting holes, with no spare tire carrier option. The metal arrives bare and has to be painted or powder coated before final installation. A winch fairlead is a separate part.
What’s included
- BFH front bumper with Brawler Bar
- BFH II rear bumper
- Recovery shackle tabs
- Captured grade-8 mounting hardware
Not included: a winch, a fairlead and paint or powder coat.






















