Overview
The Trail Gear Rear Bumper in bare steel, part number 120111-1-KIT, is a Rock Defense rear bumper built from 1020 DOM tubing (1.75″ X .120 wall).
Trail Gear explains that HREW tubing is strong, but it chose 1020 DOM because it is more dent resistant and will not split down the seam the way cheaper HREW tubing can. The bumper comes unpainted and lightly oiled to prevent rusting.
Confirm which model this part number is before ordering, since the four models in this family differ.
Key features
- Rock Defense bumper in 1020 DOM tubing (1.75″ X .120 wall)
- The 1020 DOM tubing is chosen for dent resistance and resists splitting down the seam, unlike HREW tubing.
- Bare steel, unpainted and lightly oiled against rust
- Rear bumper family for 1984-1995 4Runner and Pickup
- Not rated for towing
Rear bumper trade-offs
A rear bumper on a body-on-frame truck or SUV does more than protect the tailgate. It takes impacts when backing over ledges and carries the weight of accessories added later, so mounting points and the tube wall thickness both matter. Steel tubing protects well against dents, but a bumper of this type adds weight at the back of the vehicle, which changes approach and departure angles slightly.
Because this bumper has no tire carrier and no receiver hitch, plan how a spare tire, recovery points and any future accessories will be carried. A rear bumper is also a common place for rust to start at the welds, so inspect the seams and mounting brackets every season and touch up chips quickly. Keep the bare steel painted or coated to extend its life.
- Plan a separate spare tire mount if you carry one
- Inspect welds and brackets every season
- Touch up chips before rust spreads
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120111-1-KIT |
| UPC | 70000621732 |
| Series | Rock Defense |
| Part type | Rear bumper |
| Material | 1020 DOM tubing, 1.75″ X .120 wall |
| Finish | Bare, unpainted and lightly oiled |
| Towing rating | Not rated for towing |
| Tire carrier | No |
| Receiver hitch | No |
Vehicle fitment
The four bumper models in this family fit either a 1984-1995 4Runner or a 1984-1995 Pickup. Confirm your vehicle’s year, model and trim before ordering.
Do not assume this part number fits both vehicles; the Pickup and 4Runner use different models in the family. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper arrives bare, so it needs paint or powder coat after installation. The optional Rear Bumper to Frame Support Kit does not work with the 84-88 or 89-95 Pickup bumper.
What’s included
Not included: paint or coating, and the optional Rear Bumper to Frame Support Kit.









