Bumpers and Grille Guards
Showing 1153–1164 of 1248 resultsSorted by popularity
-
Front Bumpers
Smittybilt SRC Ultra Classic Rock Crawler Front Bumper with Winch Plate and D-ring Mounts (Black) – 76743
Front BumpersSmittybilt SRC Ultra Classic Rock Crawler Front Bumper with Winch Plate and D-ring Mounts (Black) – 76743
- Smittybilt 76743 SRC Ultra Classic rock crawler front bumper, black
- Two stage matte black powder coat finish
- 3/16-inch cold rolled steel plate
- Winch plate and D-ring mounts
SKU: S/B76743 -
Front Bumpers
Poison Spyder Customs Bruiser MID Front Bumper (Black) – 17-55-010DBTP1
- Bruiser MID front bumper for the 2007-current Jeep Wrangler JK, 2-door and 4-door
- Mid-width, multi-faceted design with a recessed winch mount
- SpyderShell Armor Coat semi-gloss black; recessed mounts for LED cube lights
- Poison Spyder part 17-55-010DBTP1
SKU: PSC17-55-010DBTP1 -
Front Bumpers
Poison Spyder BFH II Front Bumper with Brawler Bar in Black – PSC17-16-021-DBP1
- BFH II front bumper with Brawler Bar in black for the Jeep Wrangler JK, PSC17-16-021-DBP1
- Lightweight stubby design with SpyderShell semi-gloss black finish and a 5-year warranty on materials and workmanship
- Recessed light buckets take OE fog lamps or Rigid Dually lights with an adapter plate
- Requires cutting the frame
SKU: PSC17-16-021-DBP1 -
-
Rear Bumpers
Smittybilt Classic Rock Crawler Rear Bumper (Black) – 76750
- Classic Rock Crawler rear bumper with sloping ends
- Heavy duty 1/4 inch steel plate design
- Dense zinc undercoat with dual stage textured powder coat
- Robotically welded, no D-rings included
- Available in textured black only
SKU: S/B76750 -
Rear Bumpers
Go Rhino BR20 Rear Replacement Bumper (Black) – 28219T
- Go Rhino BR20 rear replacement bumper, part 28219T, textured black
- Integrated D-shackle mounts; shackles not included
- Integrated steps for easier access to the truck bed
- Provisions for license plate lights, trailer light plug and reverse sensor
- Fitment not listed; confirm vehicle year, model and trim
SKU: ORP28219T -
Rear Bumpers
Smittybilt Classic Rock Crawler Rear Bumper and Tire Carrier with Receiver Hitch (Black) – 76651
Rear BumpersSmittybilt Classic Rock Crawler Rear Bumper and Tire Carrier with Receiver Hitch (Black) – 76651
- Rear bumper and tire carrier with receiver hitch, 76651
- Moves oversized tire weight off the tailgate
- Three point mounting; 1/4″ steel plate
- Textured black, 5 year limited warranty
SKU: S/B76651 -
Front Bumpers
Poison Spyder BFH Front Bumper with Brawler Bar and Shackle Tabs (Bare)- 14-16-020-DB
- Poison Spyder BFH front bumper with Brawler Bar and shackle tabs, bare steel, 14-16-020-DB
- One piece of 3/16″ plate steel, no wider than the frame rails
- Brawler Bar extends 7.4″ forward and is 9.8″ high
- Shackle tabs from 1″ thick plate steel
SKU: PSC14-16-020-DB -
-
Rear Bumpers
Smittybilt M1 Ford Rear Bumper with D-ring Mounts and Additional Rear Lights Included (Black) – 614830
Rear BumpersSmittybilt M1 Ford Rear Bumper with D-ring Mounts and Additional Rear Lights Included (Black) – 614830
- M1 rear bumper for Ford trucks with D-ring mounts and rear lights
- Built from 3/16 inch and 1/4 inch cold roll steel
- Solid mount D-rings welded inside and out, 7/8 inch
- Completely bolts on with no drilling
- Two stage matte black powder coat, 5-year limited warranty
SKU: S/B614830
What bumpers-bumpers-tire-carriers-winch-mounts-2 and guards do
A stock bumper is mostly a cosmetic and low-speed impact piece. Aftermarket bumpers-bumpers-tire-carriers-winch-mounts-2 are heavier and often made from steel or aluminum, adding protection, recovery points and mounting space for accessories. Grille guards protect the front end from brush and animal strikes without replacing the whole bumper.
Types of products
- Front bumpers: Full replacements, available with or without a winch mount, and sometimes with light pockets or a bull bar.
- Rear bumpers: Replacements with tire carriers, hitch receivers and recovery points.
- Grille guards: Frames mounted over the front fascia to shield the grille and hood.
- Headlight guards: Cages or brackets that protect lights from rocks and branches.
- Hood bumpers: Small guards over the hood edge.
Choosing between styles
Think about how the vehicle is used. A work truck near wildlife may want a full-width guard. A rock crawler wants a high-clearance, tucked design with good approach angles. A vehicle with a winch needs a bumper with a winch plate rated for its size. Shorter, stubby bumpers-bumpers-tire-carriers-winch-mounts-2 improve approach angle but give less coverage.
What to compare
- Material and thickness: steel adds protection and weight, aluminum saves weight.
- Winch compatibility, mount size and any required fairlead.
- Weight, which affects front suspension, springs and ride height.
- Recovery points, and whether they are rated.
- Compatibility with parking sensors, front cameras, radar and airbags.
- Finish: raw steel, powder coat or textured paint.
Installation notes
Bumpers can be heavy, and a helper or a lift is useful. Some bolt to factory points and others require trimming, drilling or relocating components. Front bumpers-bumpers-tire-carriers-winch-mounts-2 add weight that may need heavier springs to maintain ride height. Wiring for winches and lights needs proper fusing and connectors. Torque all bolts to the maker's specifications and recheck after trail use. Because bumpers-bumpers-tire-carriers-winch-mounts-2 interact with airbags, sensors and crush structures, professional installation is recommended in many cases, and you should read the manufacturer's notes about driver-assist features.
Fitment and legality
Confirm fitment for your exact year, make, model and trim, and check the manufacturer's specifications. Bumper height, width and lighting rules vary by state, so check local regulations.
Matching a bumper to your build
Decide the role of the bumper first: protection, recovery, winching, lighting or looks. Then check the weight limit of your front springs and the winch's size. Heavier bumpers-bumpers-tire-carriers-winch-mounts-2 may need stiffer springs or a leveling adjustment. Approach and departure angles matter off-road, so look at how far the bumper extends and how high the bottom edge sits.
Maintenance and mistakes to avoid
- Using non-rated points for recovery. Only use points the maker says are rated, with correctly sized shackles.
- Forgetting to seal bare steel at welds and edges, which rust quickly.
- Skipping a recheck of the bolts after the first trips.
- Wiring a winch with undersized cable.
Touch up damaged coating promptly, and inspect the welds and mounts for cracks, particularly after hard use.
When weighing styles, remember a stubby bumper ends near the tire for better clearance, while a full-width one adds side coverage; neither suits every need, so think about your usual terrain before choosing.
Popular Bumpers and Grille Guards brands
- Fab Fours (330)
- Smittybilt (138)
- ARB 4x4 Accessories (94)
- Addictive Desert Designs (92)
- Ranch Hand (80)
- Poison Spyder Customs (67)
- Go Rhino (59)
- Rugged Ridge (47)
- Warn (45)
- Westin (42)
- Rampage (37)
- Nfab (35)
Shop Bumpers and Grille Guards by type
- Front Bumpers (770)
- Rear Bumpers (340)
- Grille Guards (107)
- Headlight Guards (19)
- Hood Bumpers (12)
Bumpers and Grille Guards FAQ
Do aftermarket bumpers affect airbags and sensors?
They can. Heavy bumpers change crush behavior, and some block parking sensors, radar or cameras. Choose a bumper that states compatibility with your vehicle's safety systems and follow the maker's instructions.
How much weight does a steel bumper add?
It varies widely by design, from a modest increase for aluminum or stubby styles to well over a hundred pounds for full-width steel with a winch. Check listed weights and consider spring upgrades if needed.
What is the difference between a bumper and a grille guard?
A bumper replaces the factory bumper and supports recovery and winch gear. A grille guard mounts over the existing front fascia to protect the grille and lights, and is generally lighter and less structural.
Do I need a winch-ready bumper?
Only if you plan to install a winch. A winch-ready bumper has a reinforced mounting plate sized for a specific winch. Check the plate dimensions and rating against the winch you intend to use.








