Overview
The Trail Gear Rock Defense 120061-1-KIT is a front bumper made from 1020 DOM tubing (1.75″ X .120 wall) with an unpainted steel finish. Trail-Gear chose 1020 DOM over HREW tubing, saying it is more dent resistant and will not split along the seam.
The winch plate is drilled for most 5000-9500 model low-profile winches and the smaller 9.0R Warn competition winches. Larger winches may need minor trimming of the grille. The bumper includes a shackle receiver for winch or strap recoveries. It is not rated for towing, works with a hawse type fairlead rather than a roller fairlead, and is not for use with a body lift.
Key features
- 1020 DOM tubing, 1.75″ X .120 wall
- Winch plate drilled for most 5000-9500 model low-profile winches and 9.0R Warn competition winches
- Shackle receiver for winch or strap recoveries
- Requires a hawse type fairlead, not a roller type
- Unpainted steel finish
- Not rated for towing
Winch mounting and fairleads
A front winch bumper is only as strong as its mounts and the winch plate that carries the load. The plate sits between the winch and the bumper, so check the bolt holes, the plate welds and the bumper frame for flex after heavy pulls, and keep the winch centered to spread the load.
Fairleads matter for line angle and wear. A hawse fairlead guides the cable through a fixed opening and works with this bumper, while a roller fairlead does not. Choose the fairlead type before mounting the winch so the cable runs straight and does not rub the bumper edge.
Grille clearance depends on the winch you choose. Measure the winch height and body against the grille before mounting, and plan a trim or relocation if a larger winch fouls the grille. Check the mounting bolts after every recovery.
- Check winch bolts after each heavy pull
- Keep the cable centered through the fairlead
- Measure grille clearance before mounting
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120061-1-KIT |
| UPC | 70000621790 |
| Type | Front bumper |
| Tubing | 1020 DOM, 1.75″ X .120 wall |
| Finish | Unpainted steel |
| Winch plate | Drilled for 5000-9500 low-profile winches and 9.0R Warn competition winches |
| Fairlead | Hawse type only |
| Towing | Not rated |
| Body lift | Not intended for use |
Vehicle fitment
The bumper is a front-mounted winch bumper. Check the grille clearance for the winch you plan to use before mounting it.
Make sure the year, model and trim match your Jeep before buying. Measure the grille and the winch you plan to mount first.
Installation notes
Use a hawse type fairlead only, because the bumper does not work with a roller type. Turn signal mounting tabs are not included. Larger winches than the drilled patterns cover may require minor trimming of the grille.
What’s included
- Front bumper with winch plate
- Shackle receiver
Not included: the winch, a hawse fairlead and turn signal mounting tabs.









