Overview
The Fab Fours Ranch Rear Bumper in black, part FF09-T1750-1, is a heavy duty plate bumper built from a combination of pipe and tread plate. Its design follows the body lines of each model truck, bringing Fab Fours plate bumper styling to the rear of the truck.
The standard finish is gloss black powder coat under the -1 part number, and the -B version is bare steel. Back-up lights are included, the sensor holes are pre-drilled, and the OEM receiver hitch and wiring locations are retained.
Key features
- Combination pipe and tread plate construction
- Gloss black powder coat (-1) or bare steel (-B)
- Back-up lights included
- Pre-drilled sensor holes
- Retains the OEM receiver hitch and wiring locations
Choosing a plate bumper
A rear plate bumper carries more weight than a stock rear bar, so the mounting points and receiver hitch need to take that load. Before mounting, inspect the frame area where the bumper bolts up and look for cracks, rust or bent brackets. Fitting a rear bumper often means reworking the spare tire arrangement, so decide where the spare will sit before the bumper goes on.
Rear bumpers also change departure angle and rear clearance. A tall, square plate can catch on obstacles that a stock bar would clear, so think about the trails you run. Tread plate resists wear when sliding over rock but does not reduce weight, so plan for a heavier rear end when setting suspension and spare tire placement.
- Check frame mounts before installing
- Plan the spare tire location first
- Recheck bolts after the first trail runs
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF09-T1750-1 |
| UPC | 5810102203 |
| Position | Rear |
| Construction | Pipe and tread plate combination |
| Finish | Gloss black powder coat (-1) or bare steel (-B) |
| Back-up lights | Included |
| Sensor holes | Pre-drilled |
| Tire carrier | Not included |
| D-ring mount | Not included |
Vehicle fitment
The design is matched to the body lines of each model truck. Confirm fit for your vehicle’s year, make, model and trim before ordering.
Because no specific truck is named here, fit must be checked for each vehicle before buying the bumper.
Installation notes
Back-up lights come with the bumper, so plan their wiring to the reverse circuit before the bumper is mounted. Use a fused feed and check local rules for rear lighting.
What’s included
The Ranch rear bumper in gloss black powder coat (-1), with back-up lights and pre-drilled sensor holes.
Not included: the tire carrier and the D-ring mount.
