Overview
The Trail Gear Rear Bumper in bare steel, part number 120109-1-KIT, is another Rock Defense rear bumper made of 1020 DOM tubing with a 1.75″ X .120 wall. Trail Gear builds four models that fit either 1984-1995 4Runners or 1984-1995 Pickups.
Trail Gear chose 1020 DOM over HREW tubing for dent resistance and because it does not split along the seam. The bumper is supplied unpainted and lightly oiled so it does not rust before it is finished.
Confirm which of the four models this part number is before ordering, since each model suits a different vehicle.
Key features
- 1020 DOM tubing, 1.75″ X .120 wall
- Rock Defense design from Trail Gear
- Bare steel with a light coat of oil against rust
- Not rated for towing
- Four-model family for 1984-1995 4Runner or Pickup
Choosing between bumper models
Rear bumpers on these trucks and SUVs carry more than the tire. They anchor the rear of the frame, support any tire carrier or receiver that is added, and take the first impact from a tree or a rock on a steep departure. Bumper style and the mounting bolts both change how the rear end handles that load, so the model you choose should match your vehicle’s body and bed setup.
Bare tubing needs a finish soon after fitting. Paint or powder coat the bumper once it is bolted on, then touch up any scratches from the install so rust cannot start under the coating. Inspect the welds and mounting tabs periodically, especially after rough trail use, and replace worn hardware with the same grade rather than a lower one.
- Match the model to your vehicle’s body and bed
- Check the spare tire plan before ordering
- Plan for a separate hitch if towing is needed
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120109-1-KIT |
| UPC | 70000621730 |
| Series | Rock Defense |
| Part type | Rear bumper |
| Material | 1020 DOM tubing, 1.75″ X .120 wall |
| Finish | Bare, unpainted and lightly oiled |
| Towing rating | Not rated for towing |
| Tire carrier | No |
| Receiver hitch | No |
Vehicle fitment
The Rock Defense family covers 1984-1995 4Runner and Pickup models. Confirm your vehicle’s year, model and trim before ordering.
The 4Runner and Pickup models are separate bumpers, so the match depends on the part number you need. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Finish the bare steel with paint or powder coat once the bumper is fitted. The optional Rear Bumper to Frame Support Kit is noted as incompatible with the 84-88 and 89-95 Pickup bumper.
What’s included
Not included: paint or coating.









