Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Front Bumpers
Showing 733–744 of 770 resultsSorted by popularity
-
Front Bumpers
Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs (Bare) – 17-64-020-D
- Brawler Full Width front bumper with shackle tabs for the Jeep Wrangler JK, 2-door and 4-door
- Full-width multi-faceted design protects the lower grille and reaches the outer edge of stock flares
- Recessed light buckets take OE fog lamps or Rigid Dually lights with an adapter plate
- 3/16″ plate steel in bare steel; Poison Spyder part 17-64-020-D
SKU: PSC17-64-020-D -
Front Bumpers
Smittybilt XRC Front Bumper Package (Textured) – BMPRPKG1
- Smittybilt XRC front bumper package in textured black, BMPRPKG1
- Heavy-duty 1/4″ steel plate with a 2″ receiver hitch
- Light tabs hold up to two 9″ lights; bolts directly to the vehicle
- 2-stage textured black powder coat, 5-year limited warranty
SKU: S/BBMPRPKG1 -
Front Bumpers
Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black Black – 76740D
Front BumpersSmittybilt SRC Classic Rock Crawler Front Bumper with D-ring Mounts in Matte Black Black – 76740D
- Smittybilt SRC Classic Rock Crawler front bumper, part number 76740D
- 3/16 inch cold rolled steel plate with matte black two-stage powder coat
- D-ring mounts included, bolts on with no drilling
- 5-year limited warranty
SKU: S/B76740D -
Front Bumpers
Poison Spyder BFH Front and Rear Bumpers (Bare) – TJSPECIAL08
- Poison Spyder BFH front and BFH II rear bumper set in bare steel, TJSPECIAL08
- No wider than the frame rails; integrated winch mount in a one-piece front
- Brawler Bar extends 7.4″ forward and is 9.8″ high
- Rear frame cap bumper has no spare tire carrier provision
SKU: ADDTJSPECIAL08 -
Front Bumpers
Smittybilt XRC Front Bumper – 76806
- XRC front bumper from 3/16″ cold rolled steel with a built-in winch plate, Smittybilt 76806
- Winch plate holds a winch up to 10,000 lb; aluminum or roller fairlead
- Raised corners and a stinger with light tabs for two 9″ lights
- Two stage matte black powder coat with a 5 year limited warranty
SKU: S/B76806 -
Front Bumpers
Trail Gear Rock Defense Front Bumper (Bare) – 120061-1-KIT
- Trail Gear Rock Defense front bumper in bare 1020 DOM tubing, 120061-1-KIT
- Winch plate drilled for most 5000-9500 model low-profile winches
- Shackle receiver for winch or strap recoveries; not rated for towing
- Needs a hawse fairlead; not for use with a body lift
SKU: TGI120061-1-KIT -
Front Bumpers
Poison Spyder Brawler Front Bumper and BFH Rear Bumper (Bare) – TJSPECIAL09
- Poison Spyder Brawler front bumper and BFH II rear bumper in bare steel, TJSPECIAL09
- Frame cap style rear bumper with no spare tire carrier
- Brawler Bar extends 7.4″ forward and stands 9.8″ high
- Rear installs with captured Grade 8 hardware and existing bumper holes
SKU: ADDTJSPECIAL09 -
Front Bumpers
Fab Fours Full Metal Jacket Stubby Winch Front Bumper with Grill Guard (Black) – JK07-B1856-1
Front BumpersFab Fours Full Metal Jacket Stubby Winch Front Bumper with Grill Guard (Black) – JK07-B1856-1
- Full Metal Jacket stubby winch front bumper with grill guard, Fab Fours JK07-B1856-1
- Winch capacity up to 10,000 lb; accepts WARN PowerPlant and Zeon winches
- Cutouts for factory fog lights; optional cutouts for 2×2 Rigid Dually lights
- 3/16″ steel with matte black powder coat; 3/4″ D-ring mounts
SKU: FFIJK07-B1856-1 -
Front Bumpers
Fab Fours Pre-Runner Front Ranch Bumper Tread Plate with Tow Hooks (Black) – DR03-S1062-1
Front BumpersFab Fours Pre-Runner Front Ranch Bumper Tread Plate with Tow Hooks (Black) – DR03-S1062-1
- Pre-runner front ranch bumper with tow hooks, Fab Fours DR03-S1062-1
- Bolt-on tow hooks and factory fog light mounts, pipe and tread plate build
- Optional bolt-on winch mount up to 16,500 lb and optional 2″ receiver
- Black powder coat; bare steel with the -B part number
SKU: FFIDR03-S1062-1 -
Front Bumpers
Fab Fours Grill Guard Heavy Duty Winch Front Bumper with Lights and D-ring Mounts (Black) – TT12-B1650-1
Front BumpersFab Fours Grill Guard Heavy Duty Winch Front Bumper with Lights and D-ring Mounts (Black) – TT12-B1650-1
- Fab Fours TT12-B1650-1 premium winch front bumper with full grill guard
- Winch ready for winches up to 10,000 lb; 3/4″ D-ring mounts
- Fog and turn lights included; 1/4″ boxed mounting system
- 3/16″ steel, matte black powder coat, made in the USA
SKU: FFITT12-B1650-1 -
Front Bumpers
Fab Fours Winch Front Bumper with Pre-runner Guard in Black Powdercoat (Black) – TT16-B3652-1
Front BumpersFab Fours Winch Front Bumper with Pre-runner Guard in Black Powdercoat (Black) – TT16-B3652-1
- Front winch bumper with pre-runner guard for the 2016 Toyota Tacoma, Fab Fours TT16-B3652-1
- Winch ready for a small frame winch up to 10,000 lb
- 90mm fog and 60mm turn indicator lights and 7/8″ D-ring mounts included
- 3/16″ steel, black powder coat, made in the USA
SKU: FFITT16-B3652-1 -
Front Bumpers
Fab Fours Vengance Front Bumper with Pre-Runner Grille Guard (Black) – CC15-D3352-1
- Vengeance series front bumper with pre-runner grille guard, Fab Fours CC15-D3352-1
- Center mount for a 20 inch LED light bar and side mounts for two 2×2 Dually lights; lights not included
- 11 ga. U.S. steel with a 2 stage black powder coat, made in the USA
- Bolt-on with provided brackets; weighs 75 lbs with the pre-runner guard
SKU: FFICC15-D3352-1
What an aftermarket front bumper does
A factory front bumper is mostly cosmetic and built around pedestrian-impact and fascia design. An aftermarket off-road bumper replaces it with steel or aluminum construction that can carry a winch, accept recovery shackles and protect the radiator and grille from brush and rocks. Many also add mounts for auxiliary lights or a light bar.
Common styles in this category
- Full-width winch bumpers-bumpers-tire-carriers-winch-mounts-2 with a plate or cradle for a winch and boxed or tubular frame rails.
- Bull bar and pre-runner guard versions that add a hoop or bar over the grille for extra protection and tire clearance.
- Stubby or shorty bumpers-bumpers-tire-carriers-winch-mounts-2 that trim the length and improve the approach angle at the cost of some coverage.
- Tube bumpers-bumpers-tire-carriers-winch-mounts-2 that are lighter and simpler, often with fog lamp cutouts.
- Center sections and winch bars that bolt to a factory or existing bumper structure rather than replacing it entirely.
Key specs to compare
- **Material and weight.** Steel is strong and repairable but heavy; aluminum saves weight. Added front weight affects springs, ride height and handling, so a heavier bumper often calls for stiffer front springs.
- **Winch compatibility.** Check the maximum winch size or rating the mount accepts, and whether the opening suits your winch footprint.
- **Recovery points.** Look for D-ring or shackle mounts that are through-bolted or welded into the frame structure. Never recover from a decorative loop.
- **Sensor and light provisions.** Late-model vehicles may have radar, parking sensors or fog lamps that need cutouts or relocation brackets.
- **Finish.** Powder coat is common; bare steel needs paint or coating before use to avoid rust.
Fitment and installation
Bumpers are vehicle specific. A part for a 2016 Dodge HD will not fit a Tacoma, and even within one model, years and trim packages change mounting points. Confirm fitment for your exact year, make and model, and read the manufacturer's notes about reusing factory hardware, drilling and trimming.
Plan on a helper or a transmission jack, since bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 60 pounds before a winch is added. Torque the mounting bolts to the manufacturer's specification, recheck them after the first trail runs, and have the wiring for the winch and lights done carefully. Airbag and crash-sensor locations vary, so follow the instructions and consider professional installation if you are unsure. Lighting and bumper rules vary by state, so check local regulations.
Before you buy, measure what matters. Note the factory bumper bolt pattern, the distance from the grille to the bumper face, and how much clearance you want for tires at full steering lock and compression. Compare the bumper's stated weight and the winch rating it accepts with your vehicle's front axle weight rating.
Common pairings include a winch and fairlead, a light bar or pod lights, a skid plate, and heavier front springs. Common mistakes are mounting a winch without a proper battery cable and fuse, using soft shackles on rated points without checking the rating, and skipping a retorque after the first trail runs. Inspect welds, powder coat chips and mounting bolts regularly, and touch up bare metal so rust does not creep under the finish.
Related guides
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Popular Front Bumpers brands
- Fab Fours (247)
- ARB 4x4 Accessories (78)
- Addictive Desert Designs (64)
- Smittybilt (57)
- Ranch Hand (45)
- Poison Spyder Customs (41)
- Rugged Ridge (36)
- Go Rhino (29)
- Genuine Packages (21)
- JcrOffroad (20)
- Rampage (19)
- Nfab (18)
Front Bumpers FAQ
Will a steel bumper change how my vehicle handles?
Yes. A steel bumper and winch can add well over 100 pounds ahead of the front axle, which may cause the nose to sit lower and change handling. Many owners upgrade the front springs or shocks to compensate. Check the manufacturer's weight figures first.
Do I need a winch to use a winch-ready bumper?
No. A winch-ready bumper simply has a mounting plate or cradle sized for a winch, so you can add one later. Without a winch installed, the bumper still gives recovery points and brush protection, though some openings may need a cover plate.
What is a pre-runner guard?
A pre-runner guard is a bar or hoop that rises above the bumper to protect the grille, hood edge and lights. It also adds a mounting spot for lights. Some designs improve tire clearance in the lifted stance, but they add weight and length.
Can I install a front bumper myself?
Many bolt-on bumpers can be installed with hand tools and a helper, but they are heavy and may involve sensors, wiring and airbag-related components. Follow the instructions, torque hardware to specification, and consider professional installation if you are unsure.







