Overview
The Fab Fours CC15-D3352-1 is a Vengeance series front bumper with a pre-runner grille guard, made from 11 ga. U.S. steel with a 2 stage black powder coat. Fab Fours positions the Vengeance line as lightweight premium steel bumpers for the front and rear of a vehicle, built to work with vehicles that have front sensors.
The center cutout takes a Rigid Industries 20 inch LED light bar, and each side has mounting spots for two 2×2 Dually lights. Lower cutouts let air reach the intercooler, and the bumper sits high and tight to the vehicle. The pre-runner guard version weighs 75 lbs, and the no-guard version weighs 65 lbs.
Key features
- Center mount for a Rigid Industries 20 inch LED light bar
- Side mounting options for two 2×2 Dually lights on each side
- Lower cutout for airflow to the intercooler
- Bolt-on installation with provided brackets that tie to the frame
- Lightweight: 65 lbs without a guard, 75 lbs with the pre-runner guard
- 11 ga. U.S. steel with a 2 stage black powder coat
- High and tight fit
Lights, airflow and bumper upkeep
A front bumper with a center light bar mount shifts the weight and the wiring load to the front of the vehicle. Route light wiring with a relay and a fuse close to the battery, and keep it away from moving suspension and hot exhaust parts. Confirm that the light bar sits clear of the grille and the lower cutout so airflow to the intercooler is not blocked.
Heavy steel bumpers take impacts and bend the mounting brackets over time. After rough trail use, look at the frame brackets, bolts and welds for cracks or movement. Touch up chips in the powder coat so rust does not start at the seams.
- Use a relay and fuse for light bar wiring
- Keep the light bar clear of the intercooler airflow
- Check frame brackets after hard impacts
- Touch up powder coat chips early
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CC15-D3352-1 |
| UPC | 5810111298 |
| Series | Vengeance |
| Guard style | Pre-runner grille guard |
| Material | 11 ga. U.S. steel |
| Finish | 2 stage black powder coat |
| Weight | 75 lbs with pre-runner guard (65 lbs with no guard) |
| Light bar mount | Center, for a Rigid Industries 20 inch LED light bar |
| Dually light mounts | Two 2×2 Dually lights on each side |
| Winch mount | Not included |
| D-ring mounts | Not included |
| Country of manufacture | USA |
Vehicle fitment
Fitment depends on year, model and trim, so match the bumper to your vehicle before buying.
It is designed for vehicles with front sensors, so check that your vehicle has them before buying.
Installation notes
This is a complete bolt-on bumper using the provided brackets, which tie directly to the frame. Lights and the light bar are fitted by the owner and wired separately.
What’s included
- Front bumper with pre-runner grille guard
- Mounting brackets that tie to the frame
Not included: the Rigid Industries 20 inch LED light bar and 2×2 Dually lights, which are not included. This bumper has no winch mount or D-ring mounts.














