Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Front Bumpers
Showing 697–708 of 770 resultsSorted by popularity
-
Front Bumpers
Body Armor Toyota Tacoma Front Winch Bumper in Textured Black (Textured) – TC-19335
- Body Armor front winch bumper for the Toyota Tacoma in textured black, part TC-19335
- Two-piece design with a subframe winch plate attached directly to the frame rails
- Designed for winches up to 9500 pounds; room for a small air compressor
- Reuses the OEM fog lights; bolts on at the shackle points with eight bolts
SKU: B/ATC-19335 -
Front Bumpers
Body Armor Front Winch Bumper (Black) – FJ-19336
- Enclosed front winch bumper, part number FJ-19336, from Body Armor 4×4
- 3/16-inch thick steel plate construction
- Integrated winch plate pre-drilled for the industry standard footprint
- Winch mount included; a winch is not included
SKU: B/AFJ-19336 -
Front Bumpers
Body Armor Front Winch Bumper (Black) – TC-19336
- Front winch bumper in textured black, part number TC-19336
- 5 mm steel plate shell with a 6.5 mm integrated winch plate
- Pre-drilled for the industry standard winch footprint
- Welded D-ring shackle plates and light mounts included
SKU: B/ATC-19336 -
Front Bumpers
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) – 17-64-020-DBT
Front BumpersPoison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) – 17-64-020-DBT
- Brawler Full Width front bumper with Brawler Bar and shackle tabs for the Jeep Wrangler JK, 2-door and 4-door
- Brawler Bar from 1.5″ X .120 wall DOM tubing with 1.25″ OD tube gussets
- Full width, reaching the outer edge of stock flares
- Bare 3/16″ plate steel; Poison Spyder part 17-64-020-DBT
SKU: PSC17-64-020-DBT -
Front Bumpers
Smittybilt XRC M.O.D. Option – Stinger (Black) – 76827
- Front stinger for the Jeep Wrangler JK XRC M.O.D. bumper system, 2-door and 4-door models
- Two-stage textured matte black powder coat over steel
- Marine grade stainless steel hardware
- Stinger only, not the complete bumper
- Part number 76827, UPC 631410112184
SKU: S/B76827 -
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 14-16-020-DC
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Comp Stinger (Bare)- 14-16-020-DC
- Poison Spyder BFH front bumper with shackle tabs and Comp Stinger, bare steel, 14-16-020-DC
- Stinger extends 17.6″ forward and is 21.9″ high
- One piece of 3/16″ plate steel, no wider than the frame rails
- Integrated winch mount; shackle tabs from 1″ thick plate
SKU: PSC14-16-020-DC -
Front Bumpers
Smittybilt XRC Gen2 Front Bumper and Rock Slider Package (Black) – XRCJK4.1
- Smittybilt XRC Gen2 front and rear bumper and rock slider package for 4-door models, part XRCJK4.1
- Front and rear bumpers with rocker guards, from 3/16″ solid plate
- Front stubby bumper carries winches up to 10,000 lb
- Matte black powder coat; 5-year limited warranty
SKU: S/BXRCJK4.1 -
Front Bumpers
Smittybilt XRC Gen2 Front Bumper and Rock Slider Package (Black) – XRCJK2.1
- Smittybilt XRC Gen2 front bumper and rock slider package for 4-door models, part XRCJK2.1
- Front and rear tire carrier bumpers with rocker guards, from 3/16″ solid plate
- Front stubby bumper carries winches up to 10,000 lb; fog light cutouts
- Matte black powder coat with a 5-year limited warranty
SKU: S/BXRCJK2.1 -
Front Bumpers
Go Rhino BR10 Front Replacement Bumper (Black) – 24219T
- Go Rhino BR10 front replacement bumper in textured black, part 24219T
- One-piece bumper from 1/4 inch thick steel
- Requires the BR10 Winch Tray ORP24473TW for a complete install
- Drilling may be required depending on the year of the vehicle
SKU: ORP24219T -
Front Bumpers
Go Rhino BR10 Front Replacement Bumper (Black) – 24169T
- Go Rhino BR10 front replacement bumper in textured black, part 24169T
- One-piece mild steel bumper with a D-ring mount
- Requires the BR10 Winch Tray ORP24273TW for a complete install
- Removable steel mesh covers add airflow and protection to the winch
SKU: ORP24169T -
Front Bumpers
Poison Spyder Brawler Front Bumper
- Poison Spyder Brawler front bumper for the Jeep Wrangler JK, 2-door models, bare 3/16″ plate steel
- Mid-width and high clearance, with an integrated winch mount and 2″ receiver
- Provisions for recessed backup lamps
- Includes JK Rocker Knocker rocker panel protection
SKU: ADDJKSPECIAL12
What an aftermarket front bumper does
A factory front bumper is mostly cosmetic and built around pedestrian-impact and fascia design. An aftermarket off-road bumper replaces it with steel or aluminum construction that can carry a winch, accept recovery shackles and protect the radiator and grille from brush and rocks. Many also add mounts for auxiliary lights or a light bar.
Common styles in this category
- Full-width winch bumpers-bumpers-tire-carriers-winch-mounts-2 with a plate or cradle for a winch and boxed or tubular frame rails.
- Bull bar and pre-runner guard versions that add a hoop or bar over the grille for extra protection and tire clearance.
- Stubby or shorty bumpers-bumpers-tire-carriers-winch-mounts-2 that trim the length and improve the approach angle at the cost of some coverage.
- Tube bumpers-bumpers-tire-carriers-winch-mounts-2 that are lighter and simpler, often with fog lamp cutouts.
- Center sections and winch bars that bolt to a factory or existing bumper structure rather than replacing it entirely.
Key specs to compare
- **Material and weight.** Steel is strong and repairable but heavy; aluminum saves weight. Added front weight affects springs, ride height and handling, so a heavier bumper often calls for stiffer front springs.
- **Winch compatibility.** Check the maximum winch size or rating the mount accepts, and whether the opening suits your winch footprint.
- **Recovery points.** Look for D-ring or shackle mounts that are through-bolted or welded into the frame structure. Never recover from a decorative loop.
- **Sensor and light provisions.** Late-model vehicles may have radar, parking sensors or fog lamps that need cutouts or relocation brackets.
- **Finish.** Powder coat is common; bare steel needs paint or coating before use to avoid rust.
Fitment and installation
Bumpers are vehicle specific. A part for a 2016 Dodge HD will not fit a Tacoma, and even within one model, years and trim packages change mounting points. Confirm fitment for your exact year, make and model, and read the manufacturer's notes about reusing factory hardware, drilling and trimming.
Plan on a helper or a transmission jack, since bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 60 pounds before a winch is added. Torque the mounting bolts to the manufacturer's specification, recheck them after the first trail runs, and have the wiring for the winch and lights done carefully. Airbag and crash-sensor locations vary, so follow the instructions and consider professional installation if you are unsure. Lighting and bumper rules vary by state, so check local regulations.
Before you buy, measure what matters. Note the factory bumper bolt pattern, the distance from the grille to the bumper face, and how much clearance you want for tires at full steering lock and compression. Compare the bumper's stated weight and the winch rating it accepts with your vehicle's front axle weight rating.
Common pairings include a winch and fairlead, a light bar or pod lights, a skid plate, and heavier front springs. Common mistakes are mounting a winch without a proper battery cable and fuse, using soft shackles on rated points without checking the rating, and skipping a retorque after the first trail runs. Inspect welds, powder coat chips and mounting bolts regularly, and touch up bare metal so rust does not creep under the finish.
Related guides
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Popular Front Bumpers brands
- Fab Fours (247)
- ARB 4x4 Accessories (78)
- Addictive Desert Designs (64)
- Smittybilt (57)
- Ranch Hand (45)
- Poison Spyder Customs (41)
- Rugged Ridge (36)
- Go Rhino (29)
- Genuine Packages (21)
- JcrOffroad (20)
- Rampage (19)
- Nfab (18)
Front Bumpers FAQ
Will a steel bumper change how my vehicle handles?
Yes. A steel bumper and winch can add well over 100 pounds ahead of the front axle, which may cause the nose to sit lower and change handling. Many owners upgrade the front springs or shocks to compensate. Check the manufacturer's weight figures first.
Do I need a winch to use a winch-ready bumper?
No. A winch-ready bumper simply has a mounting plate or cradle sized for a winch, so you can add one later. Without a winch installed, the bumper still gives recovery points and brush protection, though some openings may need a cover plate.
What is a pre-runner guard?
A pre-runner guard is a bar or hoop that rises above the bumper to protect the grille, hood edge and lights. It also adds a mounting spot for lights. Some designs improve tire clearance in the lifted stance, but they add weight and length.
Can I install a front bumper myself?
Many bolt-on bumpers can be installed with hand tools and a helper, but they are heavy and may involve sensors, wiring and airbag-related components. Follow the instructions, torque hardware to specification, and consider professional installation if you are unsure.










