Overview
The Smittybilt BMPRPKG1 is an XRC bumper package in a two stage textured black powder coat. The XRC bumpers have high approach angles and raised corners for ground clearance, built from 1/4-inch steel plate.
The front stinger is 1.75 tubing with two light tabs for up to two 9 inch lights. Each bumper is a complete bolt-on that needs no modification to the vehicle. The design can mount a winch up to 10,000 lb with an aluminum or roller fairlead. The package includes a 2-inch receiver hitch, sloping ends for greater tire travel and a 5-year limited warranty.
Smittybilt describes its Classic Rock Crawler Series as heavy duty bumpers made for off road use. The plate is zinc under-coated and finished with a dual stage durable powder coat, which Smittybilt says gives the bumper long life and protects the front end from large rock outcroppings.
Key features
- Heavy-duty 1/4″ steel plate design
- Raised corners and high approach angles for ground clearance
- Winch capable up to 10,000 lb with an aluminum or roller fairlead
- Two light tabs accept up to two 9 inch lights
- 2″ receiver hitch
- Sloping ends for greater tire travel
- Complete bolt-on that requires no modifications to the vehicle
- Zinc under-coated, dual stage powder coat
Front bumper and winch setup
A front bumper does more than protect the grille. It carries the winch, the lights and often the recovery points, so its mounting structure takes the loads of a pull. Keep the winch rating and the bumper’s mounting points in mind together, because the strongest winch is only as useful as the frame it bolts to.
Choosing a fairlead depends on how the winch will be used. Roller fairleads reduce drag on the line when pulling at an angle, while aluminum fairleads are lighter. Match the fairlead to the winch line and the typical angle of recovery, and keep the line spooled evenly to avoid damage.
Lights mounted on the tabs add visibility, but wiring them is separate work and needs a proper fused circuit. Check that the light tabs clear the radiator, the hood and any sensors. Textured powder coat resists chips, but touch up any exposed steel around fasteners to slow rust on a bumper used in mud.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | BMPRPKG1 |
| UPC | 631410107326 |
| Type | XRC bumper package |
| Material | Steel plate, 1/4″ |
| Finish | Two stage textured black powder coat, zinc under-coated |
| Receiver hitch | 2″ |
| Maximum winch | 10,000 lb |
| Light tabs | Up to two 9 inch lights |
| Warranty | 5-year limited |
Vehicle fitment
Check the bumper’s fit against your vehicle’s year, model and trim first.
Compare the bumper’s mounting points against your vehicle’s frame before ordering.
Installation notes
Smittybilt says each bumper in the package is developed as a complete bolt-on that needs no modifications to the vehicle.
What’s included
- XRC bumper package
- 2″ receiver hitch
Not included: a winch, fairlead and lights.




































