Overview
The Body Armor FJ-19336 is an enclosed front winch bumper from Body Armor 4×4, built from 3/16-inch thick steel plate. The integrated winch plate is pre-drilled for the industry standard footprint used by many popular winch brands.
Welded shackle plates for D-rings come standard, and extra holes in the deck under the hoop allow tow hooks to be added. The bumper has multiple mounting points for auxiliary lights. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Enclosed bumper design
- 3/16-inch thick steel plate construction
- Integrated winch plate pre-drilled for the industry standard footprint
- Welded shackle plates for D-rings.
- Additional holes on the deck under the hoop for optional tow hooks
- Mounting points for auxiliary lights on multiple positions of the bumper.
Protecting the front end
A front bumper is the first point of contact in a trail obstacle or light collision, so the steel thickness and enclosed design help protect the radiator, grille and lights. Enclosed bumpers also add weight at the front, which affects the front axle and suspension, so the vehicle’s ride and steering may feel different after fitting.
A winch plate works best when the bumper and winch are sized to each other. Check the winch’s weight and mounting bolt pattern against the plate before drilling or bolting it on. Keep the cable clean and spooled evenly to prevent damage during recovery.
Powder coat helps resist chips, but stone strikes and scrapes can still expose bare steel over time. Touch up any chips with a rust-inhibiting paint and inspect the welds and mounting bolts after rough trail use. Routine checks keep the bumper secure over years of use.
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | FJ-19336 |
| UPC | 859909002574 |
| Construction | Enclosed, 3/16-inch thick steel plate |
| Width | Full |
| Winch mount | Included |
| Light mounts | Not included in the spec table |
| Finish | Powder coat |
| Material | Steel |
| D-ring mount | Not included in the spec table |
| Fitment type | Direct fit, no vehicles named |
Vehicle fitment
No make, model or year is named for the FJ-19336. A front bumper has to match the vehicle’s frame, so confirm fit for your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm which light mounts and D-ring mounts come with the bumper before buying lights or D-rings, since the included hardware for those is not confirmed.
What’s included
The winch mount is included.
Not included: a winch, and the spec table lists light mounts and D-ring mounts as not included.









