Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
Front Bumpers
Showing 685–696 of 770 resultsSorted by popularity
-
Front Bumpers
Poison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 11-16-020-DS
Front BumpersPoison Spyder BFH Front Bumper with Shackle Tabs and Trail Stinger (Bare)- 11-16-020-DS
- Poison Spyder BFH front bumper with shackle tabs and Trail Stinger, part 11-16-020-DS
- CNC laser-cut 3/16-inch bare plate steel, integrated winch mount
- Trail Stinger 13.4 inches long and 17 inches high
- Shackle tabs from 1-inch plate steel for 3/4-inch shackles
SKU: PSC11-16-020-DS -
Front Bumpers
Smittybilt SRC Front and Rear Bumper with Tire Carrier (Black) – TJSPECIAL03
- Smittybilt SRC front and rear bumper set with tire carrier, part TJSPECIAL03
- Rear receiver is 2 inches; carrier supports a tire up to 35 inches
- 1/4-inch steel plate, zinc undercoating, black powder coat
- Two light tabs and wide winch opening on the front bumper
SKU: ADDTJSPECIAL03 -
-
Front Bumpers
Smittybilt XRC Front Bull Bar Option (Black) – 76811
- Smittybilt XRC front bull bar, part 76811, for the 1984-2001 Jeep Cherokee XJ
- Requires XRC front bumper S/B76810
- 1.75-inch tubing with two light tabs for lights up to 9 inches
- Mounts a winch up to 15,000 lb; 5-year limited warranty
SKU: S/B76811 -
Front Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs (Bare)- 17-59-010-D
- Poison Spyder Brawler Lite front bumper for Jeep Wrangler JK, part 17-59-010-D
- 3/16-inch bare plate steel with integrated winch mount
- Welded shackle tabs for 3/4-inch recovery shackles
- Recessed buckets for the factory fog lamps
SKU: PSC17-59-010-D -
-
Front Bumpers
Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Bare) – 17-63-010-DBT
Front BumpersPoison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Bare) – 17-63-010-DBT
- Poison Spyder Brawler Lite mid-width front bumper for Jeep Wrangler JK, part 17-63-010-DBT
- 3/16-inch plate steel, bare, with integrated winch mount and shackle tabs
- Recessed buckets for factory fog lamps
- Needs paint or powder coat before final installation
SKU: PSC17-63-010-DBT -
Front Bumpers
Body Armor Front Bumper (Black) – FD-19336
- Body Armor 4×4 ECO-Series front bumper, part FD-19336
- 3 mm steel plate, textured black powder coat, 79 lb
- Pockets for intercooler airflow and multiple light mounting points
- Bolt-on; no drilling, cutting or welding; lights sold separately
SKU: B/AFD-19336 -
Front Bumpers
Smittybilt 3 Inch Front Tube Bumper with Hoop (Black) – JB48-F
- Smittybilt 3 inch front tube bumper with hoop, part number JB48-F
- No-drill installation with two center light tabs included
- Winch mount and D-ring mount are not included
- Fits 2- and 4-door Jeep models; confirm the years before ordering
SKU: S/BJB48-F -
Front Bumpers
Smittybilt Classic Rock Crawler Front and Rear Bumper PAK (Black) – CLBUMPKG
- Smittybilt Classic Rock Crawler front and rear bumper set, part CLBUMPKG
- 1/4-inch steel plate with zinc undercoating and textured black powder coat
- Rear bumper has a 2-inch Class III receiver hitch
- Bolts directly to the vehicle; winch and light mounts not included
SKU: S/BCLBUMPKG -
Front Bumpers
Warn Elite Series Winch Mount Front Bumper with Light and D-ringMounts (Black) – 87775
Front BumpersWarn Elite Series Winch Mount Front Bumper with Light and D-ringMounts (Black) – 87775
- Warn Elite Series front bumper, part 87775, with recessed winch mount
- 3/16-inch steel plate, black powder coated wrinkle finish
- Recessed light ports, jack points and D-shackle eyelets
- Grille guard not included; made for 2 and 4-door models
SKU: WAR87775
What an aftermarket front bumper does
A factory front bumper is mostly cosmetic and built around pedestrian-impact and fascia design. An aftermarket off-road bumper replaces it with steel or aluminum construction that can carry a winch, accept recovery shackles and protect the radiator and grille from brush and rocks. Many also add mounts for auxiliary lights or a light bar.
Common styles in this category
- Full-width winch bumpers-bumpers-tire-carriers-winch-mounts-2 with a plate or cradle for a winch and boxed or tubular frame rails.
- Bull bar and pre-runner guard versions that add a hoop or bar over the grille for extra protection and tire clearance.
- Stubby or shorty bumpers-bumpers-tire-carriers-winch-mounts-2 that trim the length and improve the approach angle at the cost of some coverage.
- Tube bumpers-bumpers-tire-carriers-winch-mounts-2 that are lighter and simpler, often with fog lamp cutouts.
- Center sections and winch bars that bolt to a factory or existing bumper structure rather than replacing it entirely.
Key specs to compare
- **Material and weight.** Steel is strong and repairable but heavy; aluminum saves weight. Added front weight affects springs, ride height and handling, so a heavier bumper often calls for stiffer front springs.
- **Winch compatibility.** Check the maximum winch size or rating the mount accepts, and whether the opening suits your winch footprint.
- **Recovery points.** Look for D-ring or shackle mounts that are through-bolted or welded into the frame structure. Never recover from a decorative loop.
- **Sensor and light provisions.** Late-model vehicles may have radar, parking sensors or fog lamps that need cutouts or relocation brackets.
- **Finish.** Powder coat is common; bare steel needs paint or coating before use to avoid rust.
Fitment and installation
Bumpers are vehicle specific. A part for a 2016 Dodge HD will not fit a Tacoma, and even within one model, years and trim packages change mounting points. Confirm fitment for your exact year, make and model, and read the manufacturer's notes about reusing factory hardware, drilling and trimming.
Plan on a helper or a transmission jack, since bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 60 pounds before a winch is added. Torque the mounting bolts to the manufacturer's specification, recheck them after the first trail runs, and have the wiring for the winch and lights done carefully. Airbag and crash-sensor locations vary, so follow the instructions and consider professional installation if you are unsure. Lighting and bumper rules vary by state, so check local regulations.
Before you buy, measure what matters. Note the factory bumper bolt pattern, the distance from the grille to the bumper face, and how much clearance you want for tires at full steering lock and compression. Compare the bumper's stated weight and the winch rating it accepts with your vehicle's front axle weight rating.
Common pairings include a winch and fairlead, a light bar or pod lights, a skid plate, and heavier front springs. Common mistakes are mounting a winch without a proper battery cable and fuse, using soft shackles on rated points without checking the rating, and skipping a retorque after the first trail runs. Inspect welds, powder coat chips and mounting bolts regularly, and touch up bare metal so rust does not creep under the finish.
Related guides
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Popular Front Bumpers brands
- Fab Fours (247)
- ARB 4x4 Accessories (78)
- Addictive Desert Designs (64)
- Smittybilt (57)
- Ranch Hand (45)
- Poison Spyder Customs (41)
- Rugged Ridge (36)
- Go Rhino (29)
- Genuine Packages (21)
- JcrOffroad (20)
- Rampage (19)
- Nfab (18)
Front Bumpers FAQ
Will a steel bumper change how my vehicle handles?
Yes. A steel bumper and winch can add well over 100 pounds ahead of the front axle, which may cause the nose to sit lower and change handling. Many owners upgrade the front springs or shocks to compensate. Check the manufacturer's weight figures first.
Do I need a winch to use a winch-ready bumper?
No. A winch-ready bumper simply has a mounting plate or cradle sized for a winch, so you can add one later. Without a winch installed, the bumper still gives recovery points and brush protection, though some openings may need a cover plate.
What is a pre-runner guard?
A pre-runner guard is a bar or hoop that rises above the bumper to protect the grille, hood edge and lights. It also adds a mounting spot for lights. Some designs improve tire clearance in the lifted stance, but they add weight and length.
Can I install a front bumper myself?
Many bolt-on bumpers can be installed with hand tools and a helper, but they are heavy and may involve sensors, wiring and airbag-related components. Follow the instructions, torque hardware to specification, and consider professional installation if you are unsure.








