Overview
The Go Rhino BR10 24169T is a front replacement bumper for trucks, in textured black powder coat. It improves the look and function of the truck and has provisions for lights and a winch.
The bumper is a one-piece design in mild steel with a D-ring mount. A framed mesh vent cover hides the mounting bracket while allowing airflow to the vehicle, and functional, removable steel mesh covers add protection and airflow around the winch. A BR10 Winch Tray, part number ORP24273TW, is required for complete installation. It is a one-piece welded tray from 1/4″ thick steel for winches up to 16,500 lbs.
Key features
- One-piece front replacement bumper in mild steel
- Textured black powder coat
- D-ring mount
- Framed mesh vent cover hides the mounting bracket and keeps airflow
- Removable steel mesh covers for winch protection and airflow
- Winch tray ORP24273TW is required and holds winches up to 16,500 lbs
Winch and bumper setup
A front replacement bumper sets the position of the winch and the lights, so plan the layout before fitting anything. The mounting bracket and vent cover affect how air reaches the radiator and how much space the winch has. Check the winch cable path and the tray position together.
Winch trays carry heavy loads and should be bolted to the frame or mounting points with the correct hardware. Inspect the welds and mounts after recovery work, and keep the steel mesh covers clear of debris so airflow keeps moving. Removing the covers for winch service can make the job easier.
Front bumpers add weight, which can affect steering, brakes and suspension travel. A winch on the front adds more, so consider brake or suspension upgrades if the truck is used heavily. Aim lights after installation and wire them through a fused circuit.
- Plan winch cable path before mounting
- Inspect tray welds after recovery
- Keep mesh covers clear of debris
- Aim lights after installation
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 24169T |
| UPC | 887753086976 |
| Series | BR10 front replacement bumper |
| Material | Mild steel |
| Finish | Textured black powder coat |
| Construction | One piece |
| D-ring mount | Included |
| Required winch tray | BR10 Winch Tray ORP24273TW, 1/4″ thick steel, winches up to 16,500 lbs |
| Vehicle | Trucks; make, model and years not stated |
Vehicle fitment
This bumper is for trucks. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering, and match the BR10 Winch Tray ORP24273TW to your bumper before buying.
Installation notes
The BR10 Winch Tray ORP24273TW is required for a complete installation, so plan for it with this bumper. The tray is a one-piece welded part made from 1/4″ thick steel.
What’s included
- BR10 front replacement bumper
- D-ring mount
- Framed mesh vent cover
- Removable steel mesh covers
Not included: the BR10 Winch Tray ORP24273TW, the winch and any lights.









