Dana 30 vs Dana 44 vs Dana 60: how to identify the axle under your Jeep or truck, what each one handles, and when…
Ring and Pinions
Showing 37–48 of 390 resultsSorted by popularity
-
Performance Axle Components
G2 Dana 60 Front Reverse 4.10 Ratio Ring and Pinion – 2-2034-410R
- Front ring and pinion set with a 4.10 ratio, part G/22-2034-410R
- Front location, Dana 60 Reverse axle type
- Built for oversized tires and high-power engines
- No vehicle models or years are named; match the axle type first
SKU: G/22-2034-410R -
-
Performance Axle Components
G2 Chrysler 9.25 Inch Front 3.73 O.E.M. Ratio Ring and Pinion – 1-2026-373
Performance Axle ComponentsG2 Chrysler 9.25 Inch Front 3.73 O.E.M. Ratio Ring and Pinion – 1-2026-373
- Front ring and pinion gear set with a 3.73 ratio
- Made for the Chrysler 9.25 inch front axle
- Part number 1-2026-373 from G2 Axle and Gear
- O.E.M. series gears designed to run cooler and quieter
SKU: G/21-2026-373 -
Performance Axle Components
G2 Axle and Gear JL/JK Dana 30 Front 5.13 Ring and Pinion – 1-2050-513R
- Based on the product title and description, fits the front Dana 30 axle of 2018–2026 Jeep Wrangler JL and 2007–2018 Jeep Wrangler JK models
- 5.13 ratio ring and pinion, part number G/21-2050-513R
- Forged 8620 steel with tight tolerances for easier setup
- Heat treated and lapped for a smoother mesh surface
SKU: G/21-2050-513R -
Performance Axle Components
G2 Axle and Gear JL/JK Dana 30 Front 4.88 Ring and Pinion – 1-2050-488R
- Based on the product title and description, fits the front Dana 30 axle of 2018–2026 Jeep Wrangler JL and 2007–2018 Jeep Wrangler JK models
- 4.88 ratio ring and pinion, part number G/21-2050-488R
- Forged 8620 steel gears, precision-machined to OE specifications
- Lapped mating surface and heat treated gears
SKU: G/21-2050-488R -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Rear 4.88 Ratio Ring and Pinion – 1-2152-488
Performance Axle ComponentsG2 Axle and Gear JL Dana 44 Rear 4.88 Ratio Ring and Pinion – 1-2152-488
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.88 ratio ring and pinion, part number G/21-2152-488
- Forged 8620 steel gears for performance loads
- Lapped surfaces and tight machining tolerances
SKU: G/21-2152-488 -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Rear 4.56 Ring and Pinion – 1-2152-456
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.56 ratio ring and pinion, part number G/21-2152-456
- Forged 8620 steel with precision machining to OE specifications
- Heat treated gears with a lapped mating surface
SKU: G/21-2152-456 -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Rear 4.10 Ring and Pinion – 1-2152-410
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.10 ratio ring and pinion, part number G/21-2152-410
- Forged 8620 steel gears, precision-machined and heat treated
- Lapped mating surface to limit friction and wear
SKU: G/21-2152-410 -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Rear 3.73 Ring and Pinion – 1-2152-373
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 3.73 ratio ring and pinion, part number G/21-2152-373
- Forged 8620 steel gears with a lapped mating surface
- Machined to OE specifications for easier setup
SKU: G/21-2152-373 -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Front 5.38 Ring and Pinion – 1-2151-538R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 5.38 ratio ring and pinion, part number G/21-2151-538R
- Numerically highest front Dana 44 ratio in this group
- Forged 8620 steel with lapped mating surfaces
SKU: G/21-2151-538R -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Front 5.13 Ring and Pinion – 1-2151-513R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 5.13 ratio ring and pinion, part number G/21-2151-513R
- Forged, heat treated and lapped gear surfaces
- Engineered for the loads of performance vehicles
SKU: G/21-2151-513R -
Performance Axle Components
G2 Axle and Gear JL Dana 44 Front 4.88 Ring and Pinion – 1-2151-488R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.88 ratio ring and pinion, part number G/21-2151-488R
- Machined to OE specifications for a quiet, consistent mesh
- Heat treated 8620 steel gears
SKU: G/21-2151-488R
What a ring and pinion set does
The ring gear bolts to the differential carrier, and the pinion gear on the end of the driveshaft meshes with it. Their tooth-count ratio sets the final drive ratio. A 4.56 ratio, for example, means the driveshaft turns 4.56 times for every turn of the axle shaft. Lower numbers are taller gears for highway cruising, and higher numbers are shorter gears that restore pull with larger tires.
Choosing a ratio
Gear ratio is usually chosen to compensate for tire diameter. After a lift and larger tires, an engine can feel sluggish and fuel economy often drops, because the effective gearing has become taller. Regearing brings back lost acceleration and lets an automatic transmission shift less often.
- Stock tire size to about 33 inches: many vehicles move up one or two steps from the factory ratio.
- 35 inch tires and larger: higher numerical ratios, such as 4.88 or 5.13, are common on lighter engines.
- Heavy trailers or crawling use: shorter gears help, but expect higher engine speed at highway speeds.
Front and rear must always match. Many Jeep listings here are sold as front and rear pairs for that reason, such as kits for TJ, XJ, YJ, and JK Rubicon models.
Specs to compare
- Axle model and size, for example Dana 44, Ford 9 inch, or Chrysler 8.25 inch.
- Ratio and whether the set is thick or standard, which depends on the carrier.
- Carrier compatibility, since some ratios need a specific carrier break.
- Front or rear use, and whether the axle is IFS or solid.
- Included hardware, which is often limited to the gear set itself.
Installation notes
Setting up ring and pinion gears is precision work. Pinion depth, backlash, and bearing preload must be measured and adjusted with shims, and a gear marking compound pattern check confirms the setup. Incorrect setup causes noise and early failure, so many owners leave this to an experienced shop. You will usually also need a bearing and seal installation kit, and fresh gear oil with a proper break-in period.
Confirming fitment
Axle sizes vary within the same model by year and option package. Identify your axle by tag, tooth count, or housing, and confirm fitment for your exact year, make, and model using the manufacturer specifications.
Break-in and maintenance
New gears need a gentle start. Most gear makers recommend a break-in period of roughly the first 500 miles, with moderate speeds, no towing, and cool-down stops on long drives, followed by a gear oil change to flush the fine metal particles from the first heat cycles. Use the gear oil grade and any friction modifier the axle maker specifies, especially if the axle has a limited slip carrier. Afterward, listen for whining on acceleration and deceleration, which can point to a poor contact pattern or loose preload. Check the axle breather and the axle seals for leaks during oil changes. If you changed ratios, correct the speedometer and any traction control calibration so readings match the new gearing.
Related guides
- Dana 30 vs Dana 44 vs Dana 60: Which Axle Is Under Your Jeep or Truck, and When to Upgrade
- Is the Legendary Ford 9-Inch Overrated? Why Modern 4X4s Are Switching to the 8.8
Ford 9-inch vs Ford 8.8: how the two axles differ in gearing, pinion support and shaft retention, and why the 31-spline 8.8 is the…
Popular Ring and Pinions brands
- G2 Axle and Gear (317)
- Motive Gear (30)
- Dana Spicer (29)
- Alloy USA (17)
- Genuine Packages (6)
- Crown Automotive (3)
- Rough Country (2)
- Omix-Ada (1)
- Jeep (1)
Ring and Pinions FAQ
What gear ratio do I need for 35 inch tires?
There is no single answer, but many vehicles with 35 inch tires use ratios around 4.56 to 5.13. Engine power, transmission, and vehicle weight all matter, so compare the ratio against your tire size and use.
Do I have to change both front and rear gears?
Yes. Front and rear axles must run the same ratio on a four-wheel-drive vehicle, or the transfer case and drivetrain bind. That is why front and rear kits are sold together for several Jeep models.
Can I install a ring and pinion myself?
It is possible with the right tools, but setup needs a dial indicator, shim selection, and pattern checking. Mistakes cause noise and damage, so many owners have the work done at a shop that does gear installs regularly.
What is the difference between a thick and standard ratio set?
Some axles accept gears with different ring gear thickness, usually tied to the carrier used. Thick sets are matched to a particular carrier design, so confirm which one your axle needs before choosing.











