Overview
The G2 Axle and Gear 4.10 rear ring and pinion, part G/21-2152-410, is a Dana 44 AdvanTEK gear set. The product title and description place it on the rear axle of 2018–2026 Jeep Wrangler JL models.
The 4.10 ratio sits in the middle of the rear Dana 44 range offered here. It balances highway cruising with a reasonable amount of low-speed torque multiplication.
The 4.10 sits between a highway-oriented 3.73 and a numerically higher 4.56 on the rear Dana 44. The right pick depends on how the Wrangler is used most, since the 4.10 keeps engine speed moderate on the highway while adding some low-speed pulling power.
Key features
- Forged 8620 steel gear base
- Precision-machined to OE specifications with tight tolerances
- Heat treated to hold up to daily-driven loads
- Lapped surfaces for smoother operation
- Engineered for the increased loads of performance vehicles
Choosing a rear ratio
The rear ratio determines how the engine and the wheels relate at every speed. A middle ratio like this one keeps engine speed moderate on the highway while still giving the vehicle usable pulling power off the pavement. It is a common compromise for owners who drive both on and off road.
Tire size, transmission gearing and typical load all shape whether this ratio feels right. Larger tires effectively lower the gearing, so a larger tire may call for a numerically higher set to recover the feel. Locker type and axle shaft length are also worth noting, since they can affect what else must be replaced during the change.
- Compare the tire diameter with the current ratio
- Note the transmission and transfer case gearing
- Check axle shaft and bearing condition during the change
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/21-2152-410 |
| Axle location | Rear |
| Axle type | Dana 44 AdvanTEK |
| Gear ratio | 4.10 |
| Material | 8620 steel, forged |
| Surface | Lapped mating surface |
Vehicle fitment
Based on the product title and description, this rear 4.10 set is for the Dana 44 axle of 2018–2026 Jeep Wrangler JL models.
It does not cover the 2007–2018 Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth, carrier preload and backlash all need to be set before this rear pair is loaded. Use a shop that has the gauges and the master install parts.
What’s included
One 4.10 ring and pinion gear set for the rear Dana 44 axle.
Not included: the carrier and pinion bearings, shims and seals required for the install.


























