Rhino-Rack USA
Showing 97–144 of 198 resultsSorted by popularity
-
-
Base and Platform Racks
Rhino-Rack Pioneer Recovery Track Flat Bracket – 43235
- Rhino-Rack USA Pioneer recovery track flat bracket, part RHO43235
- Holds a recovery track on Pioneer roof systems for outside transport
- Corrosion resistant black powder coated steel
- Fits all sizes of Pioneer roof systems
SKU: RHO43235 -
Base and Platform Racks
Rhino-Rack Pioneer Ratchet Grab – 43139
- Rhino-Rack USA Pioneer ratchet grab, part RHO43139
- Comes with a 2.0m strap, an eye bolt and a multi-directional fitting
- Attaches longitudinally and latitudinally for securing loads
- Universal fit, so it is not tied to one vehicle
SKU: RHO43139 -
Base and Platform Racks
Rhino-Rack Pioneer Platform Side Rails – 43141B
- Rhino-Rack USA Pioneer platform side rails, part RHO43141B
- Side rail kit whose rails fit the platform C-channel for flexible mounting
- Helps keep gear secure when transporting cargo on a Pioneer platform
- Universal fit, so it is not tied to one vehicle
SKU: RHO43141B -
Base and Platform Racks
Rhino-Rack Pioneer Platform Roof Rack Tray – 43105
- Rhino-Rack USA Pioneer Heavy Duty Attachment Plate Kit, part number 43105
- Mounts Pioneer trays and platforms to Heavy Duty crossbars
- Powder-coated mild steel plates
- Two attachment plates per set for a single bar system
SKU: RHO43105 -
-
-
-
-
-
-
-
-
Roof and Windshield Lighting Mounts
Rhino-Rack Pioneer LED Light Brackets – 43156
- Rhino-Rack USA part number RHO43156
- Fits the Pioneer range of trays, elevations and platforms
- Powder coated steel in black
- Roof rack mount with a flexible sliding channel attachment
- Universal fit, not tied to one vehicle
SKU: RHO43156 -
Base and Platform Racks
Rhino-Rack Pioneer Ladder Mount – 43217
- Anchor point for the Aluminium Folding Ladder (RAFL) on a Pioneer system
- Attaches to the sides of a Pioneer platform using the channel
- Part number RHO43217 from Rhino-Rack USA
- Marked universal fit, with no specific vehicle listed
SKU: RHO43217 -
-
Base and Platform Racks
Rhino-Rack Pioneer High Lifting Jack Holder Bracket (Top Mount) – 43219
- Top-mount bracket that holds a High Lifting Jack on a Rhino-Rack Pioneer System
- Powder coated steel with a corrosion resistant finish
- Part number RHO43219 from Rhino-Rack USA
- Fits Pioneer systems of different sizes
- Universal fit, with no specific vehicle listed
SKU: RHO43219 -
Base and Platform Racks
Rhino-Rack Pioneer High Lifting Jack And Shovel Holder Bracket – 43157
- Rhino-Rack Pioneer High Lifting Jack and Shovel Holder Bracket, part 43157
- 3 in 1 kit for one side of a Pioneer Platform, Elevation or Tray
- Contains a shovel holder bracket kit, a high lifting jack bracket kit and a combination bracket kit
SKU: RHO43157 -
-
Rack Accessories
Rhino-Rack Pioneer 48″ Roof Rack Roller – 43130
- Rhino-Rack USA Pioneer 48-inch roof rack roller, part number 43130
- Set at the rear of a Platform or Elevation tray for loading
- Roller spans close to the tray width for ladders and timber
- Suits new trays and older trays through a retro-fit
SKU: RHO43130 -
Rack Accessories
Rhino-Rack Pioneer 42″ Roof Rack Roller – 43129
- Rhino-Rack USA Pioneer 42-inch roof rack roller, part number 43129
- Mounts to the rear of a Platform or Elevation tray
- Helps load ladders, sheets of timber and similar items
- Can be fitted to new trays or retro-fitted to older trays
SKU: RHO43129 -
-
-
Watersports Racks and Carriers
Rhino-Rack Nautic Kayak Carrier – 581
- Rear loading kayak carrier with cradles that lock to the crossbars
- Two front santoprene pads and two spring-loaded rear pads covered in felt
- Hidden lockable coverplate helps reduce the risk of theft
- Fits any current roof rack system with a bar channel
SKU: RHO581 -
Mount Kits and Hardware
Rhino-Rack Multi Purpose Holder – RMPHU
- Rhino-Rack multi purpose holder, model RMPHU, part number RHORMPHU
- Holds fishing rods, ski poles, kayak paddles and similar long items
- Glass-reinforced nylon with santoprene rubber padding
- Fits lengthways or sideways, or mounts directly to Pioneer planks
SKU: RHORMPHU -
-
Cargo Box
Rhino-Rack MasterFit Roof Box – RMFT440
- Rhino-Rack MasterFit roof box, part number RHORMFT440 (model RMFT440)
- 75 kg carrying capacity
- Twist to tighten and press to lock MasterFit clamping
- Fits Rhino-Rack Vortex and Euro systems directly
- Heavy Duty bars need the RUBK-MF fitting kit; crossbar spacing 620 mm to 930 mm
SKU: RHORMFT440 -
-
-
-
Mount Kits and Hardware
Rhino-Rack Leg Height Spacers – PLHS2
- Rhino-Rack Pioneer leg height spacers, model PLHS2, part number RHOPLHS2
- Fits between a RLCP, RLTF/P or RL leg and a Pioneer platform or tray
- Lets the legs slide out approximately 75mm wider overall
- Universal fit, not tied to one vehicle
SKU: RHOPLHS2 -
Mount Kits and Hardware
Rhino-Rack Leg Height Spacers – LHS-A1PAIR
- Rhino-Rack leg height spacers, model LHS-A1PAIR, part number RHOLHS-A1PAIR
- Placed between the leg unit and the roof rack crossbar
- Raises crossbars until all of them sit at an even height
- Universal fit, so check the leg units and crossbars
SKU: RHOLHS-A1PAIR -
Watersports Racks and Carriers
Rhino-Rack Kayak/Ski Bow Strap Bonnet Tie Down – RBAS1
- Rhino-Rack RBAS1 kayak and ski bow strap bonnet tie down, part number RHORBAS1
- Includes a 3.6m tie down strap with an anchor point strap
- Wraps around kayaks or objects with no front or rear tie-off point
- Used on the bow or stern, bonnet or boot
- Universal fit, so the load and tie-off points matter more than the vehicle
SKU: RHORBAS1 -
Watersports Racks and Carriers
Rhino-Rack Kayak Carrier Fitting Kit – KC-FK8
- Rhino-Rack KC-FK8 kayak carrier fitting kit, part number RHOKC-FK8
- Works with Rhino-Rack Vortex and Heavy Duty crossbars
- Also suits Thule Aero and Thule Aeroblade cross bars
- Supports S510, S512 and S512X carriers; includes screws and washers
SKU: RHOKC-FK8 -
-
-
Bike Racks and Carriers
Rhino-Rack Heavy Duty Fit Kit for Hybrid Bike Carrier – RBCA035
- Rhino-Rack USA Heavy Duty fit kit for Hybrid bike carrier, part RHORBCA035
- Fits the Hybrid / RockyMounts bike carrier to Heavy Duty crossbars
- Fitting kit only; the carrier is a separate item
- Universal fit; connects Hybrid / RockyMounts carriers to Heavy Duty crossbars
SKU: RHORBCA035 -
Tents and Awnings
Rhino-Rack Foxwing Awning Extension Piece – 31124
- Foxwing awning extension piece, part RHO31124, for the Batwing awning
- Zippered front edge insert squares off the awning for straight-out coverage
- Keeps 270 degree wrap-around shade
- Includes a new improved pole with twin peg base and hook top pin
SKU: RHO31124 -















































