Overview
The Rhino-Rack Pioneer Ratchet Grab (part RHO43139) is a cargo tie-down kit that comes with a 2.0m strap, an eye bolt and a multi-directional fitting. It is made for securing loads to a Pioneer Platform, Tray or Elevation rack. Because the fitting can attach both longitudinally and latitudinally, you can run the strap in either direction across the rack.
Rhino-Rack positions the grab for off-road trips where cargo boxes need a firm hold on the rack.
Key features
- Includes a 2.0m strap, eye bolt and multi-directional fitting
- Attaches longitudinally and latitudinally to suit the load
- Suits Pioneer Platform, Tray and Elevation racks
- Intended for securing cargo boxes when off-road adventuring
Securing cargo boxes safely
A ratchet tie-down is only as firm as the points it anchors to. Before strapping, check that the rack is clamped solidly to the vehicle and that the cargo box is seated on its base. Run the strap over the box’s lid edge or through its handles rather than across soft panels that can deform under tension.
Off-road routes add vibration and sudden jolts, so check the strap tension at each stop and after rough sections. A loose strap can allow a box to bounce and shift the rack. Inspect the webbing and eye bolt for fraying, bends or corrosion after each trip, and replace any part that shows wear. Keep the buckle clear of sharp edges so it does not abrade the webbing.
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHO43139 |
| Strap length | 2.0m |
| Included hardware | Eye bolt, multi-directional fitting |
| Compatible racks | Pioneer Platform, Pioneer Tray, Pioneer Elevation |
Vehicle fitment
This grab is universal fit and is not tied to one vehicle. It needs a Pioneer Platform, Tray or Elevation rack to anchor the strap to.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes a 2.0m strap, an eye bolt and a multi-directional fitting.









