Select your vehicle

Rhino-Rack Leg Height Spacers – PLHS2

Rhino-Rack USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rhino-Rack Pioneer leg height spacers, model PLHS2, part number RHOPLHS2
  • Fits between a RLCP, RLTF/P or RL leg and a Pioneer platform or tray
  • Lets the legs slide out approximately 75mm wider overall
  • Universal fit, not tied to one vehicle

Description

Overview

The Rhino-Rack PLHS2 is a Pioneer leg height spacer, part number RHOPLHS2, used to level a Pioneer system on a vehicle. It attaches between a Rhino-Rack RLCP, RLTF/P or RL leg and a Pioneer platform or tray.

Raising the Pioneer with these spacers lets the legs slide out wider, by approximately 75mm overall. That allows a Pioneer system to suit a wider range of vehicles, and it lets you choose a narrower tray or platform instead of a larger one.

Key features

  • Attaches between a RLCP, RLTF/P or RL leg and a Pioneer platform or tray
  • Raises the Pioneer so the legs slide out wider
  • Adds approximately 75mm of overall width
  • Allows a narrower tray or platform to be chosen for a wider range of vehicles

Choosing a spacer setup

Leg height spacers change how far a Pioneer system sits above its base, so they are often chosen when a wider stance is needed or when a narrower tray should be used. Before you buy, measure the gap between your vehicle’s body and the spot where the legs will sit, then decide whether the extra width will clear your wheels, panels and any accessories you carry.

Spacers are usually replaced together with the legs and fixings they carry, so check that the hardware in your kit is in good condition. After the first few trips, re-check the bolts holding the spacer and platform, and look for movement or wear on the contact faces. Record the torque settings you used so future checks are consistent.

Specifications

Brand Rhino-Rack USA
Part number RHOPLHS2
Model PLHS2
Compatible legs Rhino-Rack RLCP, RLTF/P or RL
Compatible base Pioneer platform or tray
Width gain Approximately 75mm overall
Fitment Universal fit

Vehicle fitment

It is a universal fit, so it is not tied to one vehicle. Fit depends on which Pioneer legs and platform or tray you use with it.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Fit the spacer between the leg and the Pioneer platform or tray, then slide the legs out to the wider setting. Use it only with the leg types named above.

What’s included

Pioneer leg height spacers. Not included: the Rhino-Rack RLCP, RLTF/P or RL legs and the Pioneer platform or tray the spacer attaches to.

SKU: RHOPLHS2 Categories: , ,

Questions & Answers

Which legs does the PLHS2 work with?

Use it with Rhino-Rack RLCP, RLTF/P or RL legs only. It attaches between one of those legs and a Pioneer platform or tray.

How much wider do the legs slide out?

The spacers raise the Pioneer so the legs slide out wider, by approximately 75mm overall. That lets a Pioneer system suit a wider range of vehicles, or a narrower tray.

Is the PLHS2 vehicle-specific?

No. It is a universal fit, so no particular vehicle applies. Its use depends on the Pioneer legs and platform or tray you have, so check those before you fit the spacer.

Should I check clearance after fitting leg height spacers?

Yes. Once the legs are moved to the wider setting, check that they clear the wheels, body panels and any accessories on the vehicle. Then test the load at low speed before a longer trip.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon