Overview
The Rhino-Rack Pioneer Pickup Kit (part RHO43175) lets you strap items to a Pioneer system quickly, using ratchet straps with loops on the ends. Its mounting blocks sit low to reduce wind resistance and install into the C-channels of the system.
The kit is a roof rack accessory with no vehicle listed. It is marked universal fit, so check that your Pioneer system has C-channels for the mounting blocks before you order.
Key features
- Ratchet straps with loops on the ends for quick strapping
- Low profile mounting blocks to reduce wind resistance
- Mounting blocks install into the C-channels of a Pioneer system
- Designed to get gear secured quickly
Strap care and checks
Ratchet straps are the part of a tie-down system that wears fastest. Webbing that is frayed, faded by sun, or stiff from weather should be replaced before it is loaded with gear. Look at the loops and the ratchet mechanism for bent parts or sharp edges that could cut the strap under tension. Route straps over padded corners where possible so a load does not rub the webbing.
Mounting blocks should be checked the same way. Make sure each block sits fully in its channel and that the fixings have not loosened after the first few drives. Blocks that move or rattle at speed point to a seating problem. Recheck them after rough roads, and keep the channels clear of grit that could prevent a firm seat.
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHO43175 |
| Strap type | Ratchet straps with loops on the ends |
| Mounting blocks | Low profile, installed into the C-channels |
Vehicle fitment
It is a Pioneer system accessory and is universal fit, so no specific vehicle applies. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the mounting blocks into the C-channels of your Pioneer system before strapping on cargo. Check that each block is seated in its channel before you drive.
What’s included
The kit includes ratchet straps with loops on the ends and low profile mounting blocks.













