Select your vehicle

Rhino-Rack Pioneer SI Light Bracket Kit – 43202

Rhino-Rack USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Light bracket kit for small work or spot lights
  • Made for the Rhino-Rack Pioneer System
  • Part number 43202
  • Universal fit, not tied to a vehicle

Description

Overview

The Rhino-Rack Pioneer SI Light Bracket Kit, part number 43202, lets you fit small work lights or spot lights to a Rhino-Rack Pioneer System.

Check your light’s size and mounting style against the kit before fitting.

Wiring and power for work lights

Small work lights and spot lights draw power from the vehicle, so the wiring plan matters as much as the bracket. Run the cable along existing harnesses where possible, keep it clear of moving parts, and use a fuse close to the power source. A switch within easy reach lets you turn the lights on and off without digging for controls.

Before clamping anything, hold the light in position and check that its beam clears the roof, windshield frame and any cargo. Once the bracket is set, test the lights on the ground and tighten the fasteners firmly. Recheck them after rough roads, because repeated bumps can slowly loosen clamps and brackets.

  • Route cable away from hot exhaust and sharp edges
  • Use a fuse close to the power source
  • Test beam direction before final tightening

Specifications

Brand Rhino-Rack USA
Part number 43202
Product type Light bracket kit
Light types Small work lights or spot lights
System Rhino-Rack Pioneer System
Fitment Universal fit

Vehicle fitment

It is a universal fit, so it is not tied to a specific vehicle. It is made for the Rhino-Rack Pioneer System, so confirm the system matches your setup before fitting.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

No hardware or lights are named as included.

Not included: small work lights or spot lights.

Questions & Answers

What is the Rhino-Rack Pioneer SI light bracket kit used for?

It fits small work lights or spot lights to a Rhino-Rack Pioneer System. No other uses or light models are named for this kit.

Does the Rhino-Rack 43202 kit fit a specific vehicle?

No vehicle is tied to this kit. It is a universal fit made for the Rhino-Rack Pioneer System, so confirm that the system matches your setup.

Are lights included with the kit?

No. The kit is a bracket for small work lights or spot lights, and no lights are named as included, so lights must come from a separate source.

Should work lights be wired through a switch?

A switch is practical for most setups because it lets you control the lights from the cab. Choose a switch rated for the current your lights draw, and keep the wiring fused so a fault does not damage other circuits.

How can I tell if the bracket has loosened?

Look for the light shifting when you push it by hand, rattling over bumps, or a change in beam angle. Retighten the fasteners to a firm hold, and recheck after the first few trips on rough roads.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon