Select your vehicle

Rhino-Rack Leg Height Spacers – LHS-A1PAIR

Rhino-Rack USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rhino-Rack leg height spacers, model LHS-A1PAIR, part number RHOLHS-A1PAIR
  • Placed between the leg unit and the roof rack crossbar
  • Raises crossbars until all of them sit at an even height
  • Universal fit, so check the leg units and crossbars

Description

Overview

The Rhino-Rack LHS-A1PAIR is a set of leg height spacers, part number RHOLHS-A1PAIR, that levels the crossbars of a roof rack. Each spacer goes between the leg unit and the crossbar, and the spacers are placed until every crossbar sits at the same height.

Spacer blocks are useful when crossbars sit at different heights, because they bring the whole rack to one even level. The spacers are sold as universal fit, so they are not tied to one vehicle model.

Key features

  • Sits between the leg unit and the roof rack crossbar
  • Raises each crossbar until all crossbars are level
  • Spacer blocks for an even crossbar height
  • Placed one crossbar at a time until every crossbar is level

Levelling a roof rack

A roof rack can end up uneven because the legs sit on different fittings or because one side has been adjusted. Spacers let you lift a low crossbar without changing the leg unit, which keeps the rack geometry consistent. Take measurements from the same point on each bar so you compare like with like before adding any spacer.

Once level, recheck the rack after the first few drives. Vibration can settle fixings, and a spacer that has shifted will change the height. Look for cracks in the leg unit or wear around the spacer faces, and replace any part that flexes or no longer seats flat. Keep the load on the rack even so the bars stay level.

  • Measure each crossbar from the same reference point
  • Tighten all leg fixings after adjusting
  • Recheck levelling after the first few drives

Specifications

Brand Rhino-Rack USA
Part number RHOLHS-A1PAIR
Model LHS-A1PAIR
Type Leg height spacer blocks
Function Levels roof rack crossbars
Fitment Universal fit

Vehicle fitment

It is universal fit, so no particular vehicle applies. Suitability depends on the leg units and crossbars of your roof rack rather than the vehicle itself.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Place each spacer between the leg unit and the crossbar, then raise the crossbars in turn until all of them are at an even level.

What’s included

Leg height spacer blocks. Check the package contents against your installation before starting.

SKU: RHOLHS-A1PAIR Categories: , ,

Questions & Answers

What does the LHS-A1PAIR do?

It is a set of leg height spacers used to level roof rack crossbars. Each spacer sits between the leg unit and the crossbar, and you raise the crossbars until they all sit at the same height.

Does the RHOLHS-A1PAIR fit a specific vehicle?

No specific vehicle applies. It is universal fit, and suitability depends on your roof rack leg units and crossbars rather than the vehicle model.

What is the part number and brand?

The part number is RHOLHS-A1PAIR and the model is LHS-A1PAIR, from Rhino-Rack USA. Check the spacer height, material and number of spacers against your installation before starting.

Do leg height spacers change how the load sits on the rack?

Yes. Adding spacers changes how the crossbars sit, so it changes how the load is positioned. Recheck the fixings and crossbar level after fitting, and keep weight spread evenly across the bars.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon