Select your vehicle

Rhino-Rack Kayak/Ski Bow Strap Bonnet Tie Down – RBAS1

Rhino-Rack USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rhino-Rack RBAS1 kayak and ski bow strap bonnet tie down, part number RHORBAS1
  • Includes a 3.6m tie down strap with an anchor point strap
  • Wraps around kayaks or objects with no front or rear tie-off point
  • Used on the bow or stern, bonnet or boot
  • Universal fit, so the load and tie-off points matter more than the vehicle

Description

Overview

The Rhino-Rack RBAS1 is a kayak and ski bow strap bonnet tie down, part number RHORBAS1, for kayaks or other objects that have no front or rear tie-off point. It includes a 3.6m tie down strap with an anchor point strap, which gives long loads an anchor when no tie-off points are available on the vehicle.

The strap wraps around and protects the kayak or object as it is secured. It can be used on both the bow and the stern, on the bonnet or the boot, and it is quick and easy to fit. Fitting instructions with step-by-step guides are in the documents section.

Key features

  • Wraps around kayaks or objects without a front or rear tie-off point
  • Anchor point strap for long loads when no tie-off points are available
  • Can be used on the bow or stern, bonnet or boot
  • Quick and easy to fit

Securing long loads on a vehicle

A tie down strap that wraps around the load and anchors to the vehicle does a different job from a roof rack. For kayaks and skis, the strap pulls the load down and keeps it from lifting in wind, and the anchor strap gives a fixed point when the vehicle has no front or rear tie-off. Position the load centrally, then route the strap so it does not cross sharp edges.

Check the strap before each trip. Look for fraying, cuts and stretching at the stitching or buckle. Retighten after the first few minutes of driving, because loads settle as the strap bears weight. Replace a strap that shows wear rather than relying on a damaged one.

  • Protect paint where straps contact the vehicle
  • Keep straps away from hot engine parts
  • Recheck tension at the first stop

Specifications

Brand Rhino-Rack USA
Part number RHORBAS1
Model RBAS1
Tie down strap length 3.6m
Fitment Universal fit

Vehicle fitment

It is universal fit and not tied to one vehicle model. Suitability depends on the kayak or load and whether it has a front or rear tie-off point.

No specific vehicles are named for this strap. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A 3.6m tie down strap with an anchor point strap.

Questions & Answers

Is the Rhino-Rack RBAS1 vehicle-specific?

No vehicle is tied to this strap, and it is universal fit. It is meant for kayaks or other objects without a front or rear tie-off point, so the load you are securing matters more than the vehicle.

How long is the RHORBAS1 strap?

The strap is 3.6m long and comes with an anchor point strap. The anchor point strap gives long loads an attachment point when the vehicle has no front or rear tie-off points.

Can it be fitted to the bow and the stern?

Yes. It can be used on both the bow and stern, on the bonnet or the boot. Read the fitting steps fully before starting, and make sure the strap sits clear of the paint and any sharp edges.

What are the brand and part number?

The brand is Rhino-Rack USA, the part number is RHORBAS1 and the model is RBAS1. Check the strap load capacity against your load before fitting.

How do I tell if a tie down strap needs replacing?

Replace it if you see cuts, fraying or stiffness, or if the buckle no longer holds tension. A strap that has been pulled hard or has run over sharp edges may be weakened even when it looks intact.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon