Overview
The Rhino-Rack Heavy Duty Leg Height Spacer (LHSPAIR) is a pair of 10 mm spacers that sit between a roof rack leg and a Heavy Duty crossbar. They level the crossbars on a roof so that all of them sit at an even height. Each spacer raises one bar by 10 mm. It fits the Ford Explorer, Land Rover Range Rover and Mitsubishi Montero roof racks.
Key features
- Two 10 mm spacer blocks in each pack
- Designed specifically for Rhino-Rack Heavy Duty bars
- Raises one bar by 10 mm, so a set of bars can be levelled
- Comes with two M10 bolts, 35 mm long
Checking crossbar height
Crossbars that sit at different heights can cause wind noise, uneven loading and wear on the rubber strips. Before adding spacers, measure each bar’s height from the roof at the same point on each side, so you know which bars need lifting. Spacers bring one bar level with the rest rather than raising the whole rack.
Spacers add height at the leg, so the bolts carry the load through a slightly longer connection. Check that the bolts are fully seated and that the crossbar sits square on the spacer before tightening. After the first trip, recheck the height and tightness, because the spacer can settle slightly under weight.
- Measure each bar at the same point
- Check bolts are fully seated
- Recheck height after the first trip
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHOLHSPAIR |
| Spacer height | 10 mm each |
| Quantity | 2 spacers |
| Bolts | 2 M10 bolts, 35 mm long |
| Compatible bars | Rhino-Rack Heavy Duty |
Vehicle fitment
It fits the 1996 to 2001 Ford Explorer and the 1996 to 2000 Ford Explorer Sport. It also fits the 1970 to 1974 and 1987 to 2002 Land Rover Range Rover, the 1993 Range Rover Sport, the 1992 to 2000 Mitsubishi Montero and the 1999 to 2004 Mitsubishi Montero Sport. Range Rover models after 2002 and Montero Sport models after 2004 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Range Rover models after 2002 and Montero Sport models after 2004 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Place each spacer between the leg unit and the crossbar. Keep adding spacers until all of the crossbars sit at the same level. The bolts are used to secure the spacer in place.
What’s included
Two 10 mm spacers and two M10 bolts, 35 mm long.









