Overview
The Rhino-Rack Nautic 581 is a rear loading kayak carrier that attaches cradles to the crossbars of a roof rack. It is a low profile carrier for kayaks and canoes, and it works with any current roof rack system that has a bar channel. It is a universal carrier, so fit depends on your roof rack rather than your vehicle model.
Key features
- Two santoprene rubber pads at the front to cushion the kayak
- Two spring-loaded rear pads covered in felt, for loading from the back
- Hidden, lockable coverplate that locks the cradles to the crossbars
- Low profile cradles that Rhino-Rack describes as simple to use
- Comes with tie down straps, keys and fitting instructions
Keeping the kayak secure
A rear loading carrier holds the kayak through its cradles, so the way the boat sits on the front and rear pads matters. Place the hull so that the front pads support the bow section and the rear pads take the weight at the back. Keep the kayak level so it does not rock on the cradles while driving.
Straps should be tightened so the hull cannot lift or slide, but not so tight that the plastic deforms. Run straps over the hull and under the crossbar where possible, and check them at every stop. Felt on the rear pads can collect grit, so wipe it clean now and then to protect the hull.
- Support the bow on the front pads
- Check straps at every stop
- Keep the cradles locked when parked
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHO581 |
| Carrier type | Rear loading kayak carrier, cradle style |
| Front pads | Two santoprene rubber pads |
| Rear pads | Two spring-loaded pads, covered in felt |
| Locking | Hidden, lockable coverplate on the secure core |
| Compatible roof racks | Any current roof rack system with a bar channel |
| Included | Cradles, tie down straps, keys and fitting instructions |
Vehicle fitment
The 581 is not tied to a vehicle model and attaches to the crossbars of a roof rack with a bar channel. Check the bar channel on your crossbars before ordering.
Installation notes
The cradles lock to the crossbars through the hidden coverplate, and the keys are supplied for that lock. The kit comes with fitting instructions. The supplied tie down straps are used to secure the kayak.
What’s included
Cradles, tie down straps, keys and fitting instructions for the carrier.
Not included: the roof rack crossbars the cradles fit to, and the kayak itself.














