Overview
The Trail Master LED Light Bar 7.5 Inch, part number TM750, is a 36W LED light bar with a combo beam. It produces 3240 lumens raw output from 12 three-watt CREE LEDs at a 6000K color temperature.
The housing is a waterproof, IP67 die-cast aluminum unit with a PC lens, built for harsh conditions. It is a universal light bar that mounts with a single bracket, with a beam of 1 lux at 147 meters and 0.25 lux at 293 meters.
Key features
- 36W LED power with 3240 lumens raw output
- 12 three-watt CREE LEDs
- Combo beam pattern
- 6000K color temperature
- IP67 waterproof rating
- Die-cast aluminum housing with a PC lens
- Aluminum bracket for mounting
Mounting and heat management
A light bar concentrates a lot of light into a small housing, so the way it is mounted matters as much as the beam pattern. The aluminum body acts as a heat sink for the LEDs, which is why keeping the housing free of mud, paint and foam covers helps it run cooler and last longer. Where the bar sits on the vehicle also affects how much road it lights and how much glare it sends toward other drivers.
Choose a bracket and mounting point that hold the bar firmly against road vibration. A bar that flexes or shifts will change its aim, so check the fasteners often. Keep wiring away from hot exhaust parts and sharp edges, and use grommets where the harness passes through sheet metal. A rear or roof location suits a bar used for work or trail lighting, while a front location is more typical for on-road aim.
Inspect the lens for cracks and check the seal after rough trails or pressure washing. If the output seems dim, look first at the connections, the relay and the fuse before assuming the LEDs have failed.
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM750 |
| UPC | 631410128499 |
| Length | 7.5 inches |
| Power | 36W |
| Raw lumens | 3240 lumens |
| Peak beam | 21500 candela |
| Operating voltage | 10-30 volts DC |
| Color temperature | 6000K |
| Waterproof rating | IP67 |
| Housing | Die-cast aluminum, black |
| Lens | PC |
| Beam pattern | Combo |
Vehicle fitment
Universal fit. A light bar of this type is not tied to a vehicle, so the mounting location and bracket choice decide where it goes.
Check the mounting location and wiring before installing, since the output is high and the only bracket included is the aluminum mounting bracket.
Installation notes
Wire the bar through a fused relay sized for the 36W load and a switch. Confirm your state’s rules on light bars before using it on a public road.
What’s included
The 7.5-inch light bar and the aluminum mounting bracket.
































