Overview
The Oracle Lighting Pre-Runner Style LED Grille Light Kit (White, part 5870-001) adds three white LED marker lights to the grille of a Jeep Wrangler JL or Gladiator JT. The lights install into the holes already in the grille, so there is no cutting or drilling involved in the setup.
Each light is a 3W LED billet bolt light, and the plug and play harness has offset cable lengths. The kit includes wiring connectors, cables and mounting hardware, along with installation instructions. It fits both two-door and four-door Wrangler JL models and the 2020 to 2026 Gladiator. The plug and play system uses the same offset cable lengths and connectors as the amber version, so both kits install the same way.
Key features
- Three 3W LED billet bolt lights
- White color for the front grille
- Installs into the existing holes of the grille
- Plug and play system with offset cable lengths
- Wiring connectors, cables and hardware included
- Installation instructions included
Choosing white grille lights
White grille lights are a common choice for a clean, factory-style look on a Jeep front end. Because the lights sit in the grille, they share the space with the radiator and grille screen, so the layout should leave room for airflow and for the harness. A white light setup also pairs naturally with other white auxiliary lighting, which helps keep the front of the vehicle consistent.
Plan the harness route before tightening any hardware, and keep the cables away from the fan and any sharp edges. Check the lamp lenses for cracks after trail use, and clean road film from the surface so the light output stays even. Over time, grille connectors can work loose, so look at the plugs during routine maintenance.
- Leave room for grille airflow
- Pair with matching auxiliary lights
- Check lenses for cracks after trail use
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5870-001 |
| Light type | LED billet bolt lights |
| LEDs | Three 3W LEDs |
| Color | White |
| Mounting | Grille holes, hardware included |
| Wiring | Plug and play harness, offset cable lengths |
| Power note | DRL wire cannot be used as a power source |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator and the 2018 to 2026 Jeep Wrangler JL in both two-door and four-door Unlimited forms. Several trim names are covered, including Rubicon, Sahara, Sport and Moab. Confirm your vehicle’s year, model and trim before ordering.
Years before 2018 and Wrangler models outside the JL generation are not on this list, so check the grille on those models before ordering.
Installation notes
The DRL wire cannot be used as the power source. Connect the harness to the park lights for manual control, or to an auxiliary switch. The AUTO setting turns the lights on at night, and fuse F52 is used for full automatic control.
What’s included
Three white LED billet bolt lights, the plug and play harness, offset cables, wiring connectors, mounting hardware and installation instructions.
















