Overview
The KC HiLites FLEX ERA 4 Combo Beam Single Light, part number 1287, is a single high-output LED light for off-road driving and racing. KC HiLites lists 7,912 raw lumens at 5000K, 80 watts and a CREE LED XHP 50.2 source. The company’s performance figures give 1,800 lux at 10 meters and a beam distance of 424 meters.
The light is part of KC’s FLEX ERA family and is designed to keep going on rough trails and long races. Its IP68 rating covers dust and water resistance, and the input runs from 9 to 36 volts. KC’s performance table labels the beam as spot, while the product is sold as a combo, so confirm the pattern you need before choosing it for a particular use.
Key features
- 7,912 raw lumens at 5000K
- CREE LED XHP 50.2 source
- 80 watts per light
- IP68 rating
- Input voltage from 9 to 36 volts
- Single light, sold individually
Wiring for high-output lights
High-output driving lights place a steady load on the electrical system, so the circuit deserves more care than a small accessory. Use a fused relay close to the battery, a switch that handles only the relay’s control current, and wire sized for the total draw of everything on the circuit. Voltage drop along a long, thin cable shows up as dim output, so keep runs short and clean at the terminals. Running the engine and keeping the charging system healthy help when several lights run together.
Aim and cover have a big effect on performance. A light tilted high wastes its beam on the sky, while a light set too low lights only the hood. Set the aim on level ground with the vehicle loaded the way it normally runs. Dust, mud and stone chips also reduce output over time, so wipe the lens after trail use and look for cracks in the cover after hard impacts.
- Check the fuse and relay after the first few runs
- Inspect the wiring for chafing where it passes through the body
- Re-aim the light after changing suspension height or tire size
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | K/C1287 |
| Series | FLEX ERA 4 |
| Raw lumens | 7,912 lm at 5000K |
| Lux at 10 meters | 1,800 lx |
| Candela | 180,000 cd |
| Beam distance | 424 meters |
| Beam pattern | Combo (KC’s performance figures are labeled spot) |
| Wattage | 80 W |
| LED source | CREE LED XHP 50.2 |
| Amp draw | 6.7 A at 12 V |
| Voltage | 9 V to 36 V |
| IP rating | IP68 |
| Dimensions | 5.0 in W x 5.0 in H x 3.27 in D |
Vehicle fitment
The FLEX ERA 4 is a universal fit and is not built for one vehicle. Its housing measures about 5 by 5 inches, and the mounting position is the owner’s choice, checked against the bumper or bar.
Installation notes
At 6.7 amps per light, wire the light through a fused relay and a switch circuit sized for that load. Set the aim with the beam pattern you intend to run, and check local rules on high-output driving lights before using them on a road vehicle.
What’s included
The package is a single light. A wiring harness, relay and mounting hardware are not included, so gather them before fitting.



















