Select your vehicle

ARB Solis Wiring Loom – SJBHARN

ARB 4x4 Accessories

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ARB Solis wiring loom, part number ARBSJBHARN
  • Universal fit for lighting wiring
  • Made for the Intensity Solis lights, which come in spot or flood beams

Description

Overview

The ARB Solis wiring loom, part number ARBSJBHARN, is universal fit. It is a wiring accessory for ARB driving lights, and it is intended for use with the Intensity Solis driving lights.

The Intensity Solis lights are offered in a spot or flood beam, with interchangeable red and black die-cast side bezels. They have a five-stage dimmability function and a single-piece reflector, and ARB gives their output as 165 watts of OSRAM LED performance.

Confirm that the loom matches the Solis light and version you plan to use before ordering.

Key features

  • Wiring loom for ARB lighting
  • Universal fit
  • Five-stage dimmability on the Intensity Solis lights

Wiring basics for lights

A driving light loom carries power from the battery or fuse block to the light and often includes a relay, connectors and a switch. Wire gauge should match the current the light draws, and runs should be as short as practical to limit voltage drop. Loose connections and undersized wire are common causes of dim or flickering lights.

Weatherproof connectors and heat shrink help keep moisture out of joints, which matters on trails with water crossings. Route the harness away from sharp edges, moving suspension parts and exhaust heat, and secure it with clips at regular intervals. Ground connections should be clean and tight, since a poor ground can look like a light fault.

Dimming controls are usually part of the light or a separate controller rather than the loom itself, so match the controller to the light model. Keep a spare fuse and relay on hand for trail use, and check the wiring after rough sections.

  • Match wire gauge to the light’s draw
  • Use weatherproof connectors at joints
  • Secure the harness away from heat and moving parts
  • Check ground connections for corrosion

Specifications

Brand ARB 4×4 Accessories
Part number ARBSJBHARN
Type Wiring loom
Fitment Universal fit

Vehicle fitment

The loom is universal fit and is not sized for a specific vehicle. Match it to the light and power source you plan to use.

What’s included

One wiring loom under part number ARBSJBHARN. Check the package contents against your installation before starting.

Questions & Answers

Is the ARB Solis wiring loom universal fit?

It is universal fit. The loom is intended for the Intensity Solis lights, so confirm it matches the light you are using before installing.

What lights does the Solis loom work with?

The Intensity Solis driving lights come in spot or flood versions, and the loom is for those lights. Check the light and version before ordering.

Does the loom add dimming?

Five-stage dimmability is a feature of the Intensity Solis lights. Check the loom's own function against the light before ordering, since dimming depends on the light's control.

Does a driving light loom need a relay?

Often yes, because the lights draw more current than a switch should carry. A fused relay takes the load off the switch and wiring. Check the fuse rating against the light's draw before connecting.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon