Overview
The Smittybilt 2910 is a 10 inch drop ball mount, part of the company’s line of drop ball mounts for towing. It is a Class III hitch rated for up to 3,500 lbs gross trailer weight and 350 lbs tongue weight, and it fits 2 by 2 inch receivers.
The mount is made from hammer forge hardened Q235 steel and is robotic welded with reinforced gussets for accuracy and strength. The finish is a tough powder coat for corrosion and rust protection, and the mount is listed in black.
The drop is 10 inches, and the ball hole is listed at 1 inch. The rating is lower than that of the shorter drop versions in this line, so compare the drop and the rating with your trailer before choosing.
Key features
- 10 inch drop
- Class III rating
- Hammer forge hardened Q235 steel
- Reinforced gussets
- Robotic welded construction
- Powder coat finish
- 2 by 2 inch shank
Choosing a drop height
Drop height decides where the ball sits relative to the trailer coupler, and a poor match causes a trailer to ride nose-high or nose-low. Measure from the ground to the receiver opening and to the coupler before choosing. A trailer should sit level once hitched, so check the ride height on level ground before heading out.
Once the mount is in, keep the connection in good shape. Look over the welds and gussets for cracks, keep the ball and pin clean, and confirm the hitch pin is fully seated before each trip. Re-check the connection after rough roads, because a loose ball can wear the mount and the coupler faster.
- Measure receiver and coupler heights first
- Confirm the trailer sits level once hitched
- Inspect welds and gussets for cracks
- Seat the hitch pin fully before each trip
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2910 |
| UPC | 631410109702 |
| Drop | 10 inches |
| Material | Q235 steel |
| Class | Class III |
| Gross trailer weight | 3,500 lbs |
| Tongue weight | 350 lbs |
| Shank size | 2 inches by 2 inches |
| Ball hole size | 1 inch |
| Finish | Black powder coat |
Vehicle fitment
It is a receiver-mounted hitch part, so fit depends on the receiver size and the tow vehicle’s rating. It fits 2 by 2 inch receivers.
Check the tow vehicle’s receiver and rating before installing. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The drop ball mount only. Bring a hitch ball and hitch pin that match your trailer.









