Overview
The Smittybilt adjustable aluminum ball mount in satin finish, part 2926, is a lightweight 2 inch receiver hitch with a 6 inch drop. It is machined from high grade billet aluminum, and its maximum load rating is 6,000 lbs.
The mount adjusts the ball to the proper height and locks in place with stainless steel pins. It fits all 2 by 2 inch receivers and takes reversible steel balls in 2 inch and 2 5/16 inch sizes.
Key features
- 6 inch drop aluminum hitch
- Fits all 2 by 2 inch receivers
- Reversible 2 inch and 2 5/16 inch steel balls
- Stainless steel locking pins
- 6,000 lbs maximum load rating
Setting the ball height
Ball height has to match the trailer coupler so the trailer sits level once hitched. Load the trailer as you will tow it, measure the coupler height, then set the drop so the ball lines up. A trailer that sits nose high or low can shift weight onto the tow vehicle’s rear axle or front axle and affect braking and steering.
The stainless steel locking pins hold the setting once it is correct. Push each pin fully through, confirm it is seated, and recheck after the first few miles of towing, since road vibration can work a pin partly loose. Keep spare reversible balls matched to your coupler so a swap is quick.
- Set the height with the trailer loaded
- Confirm both locking pins are fully seated
- Recheck the pins after the first few miles
- Keep the ball size matched to the coupler
Specifications
| Brand | Smittybilt |
|---|---|
| UPC | 631410111149 |
| Product type | Adjustable ball mount |
| Material | Aluminum, machined from billet |
| Finish | Satin |
| Drop | 6 inch, adjustable |
| Shank size | 2 inches x 2 inches |
| Ball hole size | 1 inch |
| Ball sizes | Reversible 2 inch and 2 5/16 inch steel balls |
| Maximum load rating | 6,000 lbs |
Vehicle fitment
This ball mount is not tied to a specific vehicle. It fits 2 by 2 inch receivers, so confirm your hitch receiver size first.
Confirm the receiver size and load rating against your hitch before ordering.
Installation notes
Set the ball to the proper height, then lock it with the stainless steel pins. Confirm the pins are seated before towing.






















