Overview
The Smittybilt 8 Inch Drop Ball Mount (part 2908) is a Class III receiver hitch ball mount with an 8 inch drop for 2 in x 2 in receivers. The drop lowers the hitch ball so a trailer can ride level behind a vehicle whose receiver sits higher than the trailer coupler. Smittybilt rates it for up to 5,000 lbs gross trailer weight and 500 lbs tongue weight.
The mount is made from forge-hardened Q235 steel and robotically welded, with reinforced gussets on the drop for added strength. A black powder coat protects the steel from corrosion and rust. The ball hole takes a 1 inch ball.
Key features
- 8 inch drop for trailers that sit lower than the receiver
- Class III rating: up to 5,000 lbs GTW and 500 lbs tongue weight
- Reinforced gussets on the drop for added strength
- Robotic welding for consistent accuracy
- Black powder coat for corrosion and rust protection
- Fits 2 in x 2 in receivers
Measuring for a level tow
An 8 inch drop suits a trailer that sits well below the receiver, but it also changes the load on the hitch. Measure from the ground to the receiver opening and to the trailer coupler, then decide whether the drop lowers the ball enough. A longer drop can change how the trailer leans under braking, so test the setup on a short, level route before a longer trip.
Tongue weight sits on the ball and the shank, and it affects steering and braking on the tow vehicle. Load the trailer so that weight sits slightly forward of the axle, and keep the total within the lower of the mount’s rating and the tow vehicle’s rating. Inspect the reinforced gussets and welds on the drop after the first few trips, and tighten the hitch pin before every tow.
- Measure receiver and coupler heights first
- Confirm the tow vehicle’s rating before hitching
- Check the drop after the first few tows
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2908 |
| UPC | 631410109696 |
| Drop | 8 inch |
| Receiver (shank) size | 2 in x 2 in |
| Ball hole size | 1 inch |
| Material | Q235 steel, forge hardened |
| Finish | Black powder coat |
| Towing rating | Class III: up to 5,000 lbs GTW, 500 lbs tongue weight |
Vehicle fitment
It fits 2 in x 2 in receivers. Match your receiver size, then confirm the tow vehicle’s rating suits this mount’s Class III rating before ordering.
Installation notes
Measure the height from the ground to your receiver opening and to the trailer coupler before choosing a drop. An 8 inch drop lowers the ball well below the receiver, so check that the trailer still sits level once it is hitched. A 2 inch drop from the same line suits trailers that ride closer to the receiver height.
What’s included
The drop ball mount only. Check the package contents against your installation before starting.









