Overview
The DrawTite 40342 is a Class III/IV quick loading ball mount with an 8.5 inch length, a black finish and a 2 inch drop. It fits a 2 inch receiver and carries a 6000 lbs. GTW and 600 lbs. tongue weight rating.
An angled cut on the mount slides it into the receiver with less effort, and the angle also reduces weight for easier handling.
Key features
- Quick loading angle cut
- Class III/IV rating
- 6000 lbs. GTW and 600 lbs. tongue weight
- 8.5 in. length
- 2 in. drop and 0.75 in. rise
- Black finish
- Steel construction
Before you tow
A ball mount is the link between your tow vehicle and the trailer, so its rating has to cover the heaviest load you plan to pull. Check the trailer’s gross weight and tongue weight against the mount’s ratings before hooking up, and remember that the ball, the receiver and the pin all share those loads. A correctly rated mount that is worn or loose can still fail, so look over the weld joints and the shank for cracks or bends before each trip.
Drop and rise matter for level towing. A trailer that sits lower than the hitch causes the nose to dip and the rear of the tow vehicle to rise, which affects steering and braking. Measure the height with the trailer loaded on level ground, then choose the drop that brings the top of the ball level with the coupler. Tighten the hitch pin and check the clip each time you connect.
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 40342 |
| UPC | 107425124035 |
| Class | Class III/IV |
| Gross trailer weight | 6000 lbs. GTW |
| Tongue weight | 600 lbs. |
| Receiver size | 2 in. |
| Ball hole | 1 in. |
| Length | 8.5 in. |
| Drop | 2 in. |
| Rise | 0.75 in. |
| Shank size | 2 inches x 2 inches |
| Material | Steel |
| Finish | Black |
| Packaging | Bulk |
Vehicle fitment
It is universal fit, so it is not tied to a model year. The 2 inch receiver size and the 6000 lbs. GTW rating decide whether it suits your setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the angle cut to guide the mount into the receiver. Compare the GTW and tongue weight figures with your trailer’s requirements before towing.
What’s included
The mount ships in bulk packaging only. Not included: a hitch ball and a separate receiver.









