Overview
The 45-12-R50 is a bare steel A-pillar light bar mount for a 50-inch Rigid Industries E-Series or SR-Series LED light bar on the Jeep Wrangler YJ, covering the 1987–1995 model years.
The mount is CNC laser cut from 3/16-inch thick plate steel, precision brake-formed and finish welded. Its contoured design hugs the slight curve of the windshield A-pillar and holds the Rigid 50-inch light bar securely on the highway or in rough terrain.
Installation uses the existing lower windshield bracket bolts. Rubber liners protect the paint under the mounts. The mounts are shipped as bare steel and are ready for paint or powder coat in the color the owner chooses.
Key features
- Holds a 50-inch Rigid Industries E-Series or SR-Series light bar
- Contoured to the windshield A-pillar curve
- CNC laser cut from 3/16-inch thick plate steel
- Attaches with the existing lower windshield bracket bolts
- Rubber liners protect the paint
- Bare steel, ready for paint or powder coat
Fitting a curved A-pillar mount
Because the mount follows the curve of the windshield A-pillar, the contact surfaces need to sit flat against the pillar before the bolts are tightened. Gaps can stress the bracket and crack paint, so test the fit with the mount loosely bolted before final torque.
Light bars put steady load on the windshield frame, and older frames can flex more than new ones. Look for rust, cracks or soft spots around the bracket. Repair any corrosion before adding a large light bar, since the mount is only as solid as the frame it bolts to.
Bare steel can be painted or powder coated, and a coating helps resist rust at the bolt holes. Keep the rubber liners in place so the coating is not worn at contact points.
- Test-fit before final tightening
- Repair rust on the frame first
- Keep liners in place to protect coating
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-12-R50 |
| UPC | 614901736038 |
| Light bar size | 50-inch Rigid Industries E-Series or SR-Series |
| Material | 3/16-inch steel plate |
| Mounting type | Upper windshield, A-pillar |
| Fitment type | Direct fit |
Vehicle fitment
This mount is made for the Jeep Wrangler YJ, covering the 1987–1995 model years.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for TJ, LJ, JK or JL models.
Installation notes
The mount fastens with the bolts already in the lower windshield bracket. Rubber liners go under the mounts. Because the mount is shaped to the A-pillar curve, check the fit against the windshield before final mounting.
What’s included
The bare steel A-pillar light bar mount with its rubber liners.
Not included: the Rigid Industries 50-inch light bar, and paint or powder coating.









