Overview
The G2 Axle and Gear 80-BRGPLLR is a clamshell bearing puller for differential work, part number 80-BRGPLLR. Clamshell pullers grip a bearing from the outside, which G2 says reduces the risk of damaging the bearing cage compared with two-jaw pullers.
It is designed for quick, easy shim changes. It is a universal fit tool, so it is not tied to a particular year, make or model.
Key features
- Clamshell design that G2 says reduces cage damage compared with two-jaw pullers
- Small, medium and large clamshell sizes
- Adjustable pilot for positioning the puller
- Spacer sleeve and a handy carrying and storage tray
Using a clamshell puller
A clamshell puller grips the bearing from the outside, so it can be used where there is little room behind the bearing or where a two-jaw puller would have to bite into the cage. Set the clamshell halves square to the bearing and tighten them evenly. The adjustable pilot helps center the puller so the pull stays straight and the bearing comes off without binding.
Choose the clamshell size that closes fully around the bearing without forcing it. Use the spacer sleeve to keep the puller seated at the correct depth. After removal, inspect the bearing cage, rollers and race for cracks or heat marks, and check the shim pack for damage before reinstalling any bearing.
- Work slowly and keep the puller square
- Keep the clamshells, pilot and sleeve in the storage tray between jobs
- Replace any bearing that shows cage damage or heat discoloration
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 80-BRGPLLR |
| UPC | 631410103663 |
| Tool type | Clamshell bearing puller |
| Clamshell sizes | Small, medium and large |
| Pilot | Adjustable |
Vehicle fitment
This is a tool rather than a vehicle-specific part, used for differential work.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One clamshell bearing puller with small, medium and large clamshells, an adjustable pilot, a spacer sleeve and a carrying and storage tray.
Not included: the bearings and differential parts that the puller works on.









