Overview
The G2 Axle and Gear NP242 Transfer Case Rebuild Kit with BD50-8 Input Bearing, part number 37-242, is a rebuild kit for NP242 transfer cases in 1987–1993 Jeep Cherokee (XJ) models, in eight trims.
The kit covers the small parts a worn transfer case needs, including bearings, seals, bushings and gaskets, along with a BD50-8 input bearing. A chain is not supplied.
Key features
- Includes a BD50-8 input bearing
- Bearings, seals, bushings and gaskets for a rebuild
- Chain not included
- Direct fit for eight 1987–1993 Cherokee XJ trims
- Designed for a worn transfer case
Fitting the input bearing
The input bearing supports the shaft that feeds power into the case, so it carries steady load during every drive. Check that the bore it sits in is clean and free of scoring before pressing the new bearing home. A loose or rough-turning bearing points to a bore or shaft that needs attention too.
Because the job involves bearings, seals and clearance checks, a shop with transfer case experience is the practical route for most owners. Match each part against the old one during teardown, and set aside any part that does not line up with the original. Keep the work area clean, since grit can ruin fresh bearings quickly.
- Clean the bearing bore and shaft surfaces
- Confirm the bearing matches the old one
- Replace seals alongside the bearings
- Keep grit away from fresh bearings
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 37-242 |
| UPC | 631410107784 |
| Transfer case | NP242 |
| Input bearing | BD50-8 |
| Contents | Bearings, seals, bushings, gaskets |
| Chain | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Fitment covers the 1987–1993 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Country, Laredo, Limited, Pioneer and Sport trims.
Cherokee years outside 1987–1993 are not on this list. The 1984–1986 Cherokee kit is a separate part number (37-207). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rebuild requires disassembly and careful bearing and seal fitting, so professional installation is the practical route for most owners. Confirm that the BD50-8 input bearing matches your case before starting the job.
What’s included
It fits the 1987–1993 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Country, Laredo, Limited, Pioneer and Sport trims. Cherokee years outside that range are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Not included: the transfer case chain.








