Overview
The G2 Axle and Gear 2-2041-571 is a 5.71 ratio ring and pinion for the Toyota 8 Inch axle. The pinion turns 5.71 times for each ring gear revolution, and that steep ratio favors acceleration and low-speed pulling.
The set is for front and rear positions on the Toyota 8 Inch axle. The Performance line is made for oversized tires and high-performance engines. Verify the Toyota 8 Inch housing and carrier on your vehicle before buying.
Key features
- 5.71 gear ratio for the Toyota 8 Inch axle
- Fits front and rear axle locations.
- Ring gear and pinion sold as one set
- Made for oversized tires and high-performance engines.
- Made with current materials and methods.
Setup and break-in
A 5.71 ratio is a steep setting, and the trade is higher engine speed on the highway. For towing or heavy trail work the pulling force is useful, but daily driving will feel busier than with lower ratios. Plan the gear choice around how the truck is used most of the time.
Break-in matters more with a steep set because the tooth contact changes as the surfaces wear in. Keep the cover bolts snug, watch for leaks at the pinion seal, and refresh gear oil after the first few runs to clear any fine particles.
When the gears are changed, inspect the carrier bearings and pinion bearing for play before reassembly, since worn bearings allow the new gears to shift off their setup.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 2-2041-571 |
| UPC | 631410094329 |
| Axle type | Toyota 8 Inch |
| Axle location | Front or rear |
| Gear ratio | 5.71 |
| Axle manufacturer | Toyota |
Vehicle fitment
This 5.71 set is for the Toyota 8 Inch axle in front or rear positions. Confirm the housing and location on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.71 set needs precise tooth contact and carrier preload, so a gear shop with setup tools is the practical installer. Plan on a break-in period before heavy use.
What’s included
One 5.71 ring and pinion set for the Toyota 8 Inch axle, part number 2-2041-571.
Not included: Carrier bearings, shims and installation hardware are not part of this set.
















