Overview
The G2 Axle and Gear 25-2064 is a minor ring and pinion install kit for a Toyota 10.5-inch axle. It bundles the pinion nut, pinion seal, crush sleeve, pinion and carrier shims, ring gear bolts and the thread locking, gear marking and silicone sealing compounds needed during gear installation.
The axle size is the main identifier for matching this kit, so confirm the 10.5-inch Toyota axle against your vehicle before ordering.
Choosing a Toyota axle match
Matching a 10.5-inch Toyota axle starts with measuring the housing, axle shaft flange and existing ring gear before buying a minor kit. Minor kits cover shims, seals, fasteners and compounds for a gear set that is already in the axle, so the gears must be sound and the correct size. Because fitment is tied to axle size and the vehicle’s year and model, confirm both before ordering.
Gear setup relies on pinion depth, carrier bearing preload and backlash, which are adjusted with shims and checked with gear marking compound. Replace the pinion nut and crush sleeve during the job, and use new seals where the old ones were disturbed. When the axle is closed, fill with the correct gear oil and recheck for smooth rotation and quiet operation.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2064 |
| UPC | 631410129267 |
| Axle size | 10.5-inch Toyota minor ring and pinion |
Vehicle fitment
Check that your axle is a 10.5-inch Toyota unit before ordering.
Confirm your vehicle’s year, model and trim before ordering, and measure the axle to match this kit’s size.
Installation notes
Ring and pinion installation is precision work. The gear marking compound supports a tooth contact pattern check during setup, and the pinion shims and carrier shims are used to set gear position and bearing preload. Work with a qualified technician or follow a complete service procedure, and wear eye protection when handling gears and compounds.
What’s included
The kit includes a pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.
Not included: The ring gear and pinion gear set are not part of this kit, so source them separately.








