Overview
The G2 CORE 44 rear axle assembly, part number G/2C4YSR456AC0D, is a complete rear axle with a 4.56 ratio, an ARB Air Locker and a disc brake kit. It is made for 1987-1995 Jeep YJ Wranglers and 1984-2001 Jeep XJ Cherokees.
G2 developed the CORE 44 housing to carry loads that would bend a stock Dana 30 or a Rubicon Dana 44. The housing accepts stock Dana 44 ring and pinions, axle shafts and aftermarket lockers.
Key features
- Complete rear axle assembly with a 4.56 ratio
- ARB Air Locker
- Disc brake kit included with the assembly
- Takes stock Dana 44 ring and pinions and axle shafts
- Accepts aftermarket lockers.
Setting up a complete axle swap
A complete rear axle changes more than the gears. Driveline angles, brake line length and the shock and spring mounts all need to be checked against the vehicle before the axle is bolted in. Angles that are too steep can cause vibration, so measure them with the vehicle at ride height.
Lockers change how the axle behaves on the trail, so the tire size and the gear ratio should suit the locker in use. Air lockers need a working air supply and a clean connection, and the air line should be routed away from heat and moving parts. Check the brake lines and hoses after the first few drives, since stretching can show up as the axle settles.
- Driveline angle at ride height
- Brake line routing and length
- Air supply for air lockers
- Hose and fitting check after first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | G/2C4YSR456AC0D |
| Assembly type | Complete rear axle assembly |
| Gear ratio | 4.56 |
| Locker | ARB Air Locker |
| Brakes | Disc brake kit |
| Housing | CORE 44, accepts stock Dana 44 ring and pinions and axle shafts |
Vehicle fitment
G2 names these two vehicles for this rear axle: 1987-1995 Jeep YJ Wranglers and 1984-2001 Jeep XJ Cherokees. Other Wrangler generations such as TJ, LJ and JK, and the Grand Cherokee models, are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
As a complete axle, this unit needs driveline angle and brake line routing checks during the swap. Confirm the locker and gear setup match your build before the first drive.
What’s included
Stock Dana 44 ring and pinions and axle shafts are accepted by this housing. Check the package contents against your installation before starting.








