Overview
The G2 Axle and Gear 25-2032B is an aftermarket R&P minor ring and pinion install kit for the Dana 30 axle of the 1993 to 1998 Jeep Grand Cherokee ZJ. It holds the nut, seals, sleeve, shims, bolts and compounds for a minor gear set.
The title labels the gear set aftermarket R&P, which means ring and pinion, and the ZJ code sets the Grand Cherokee application.
Dana 30 ZJ setup tips
The Dana 30 fits 1993 to 1998 Grand Cherokee ZJ models, and this kit is not for the WJ model from 1999 to 2004. A minor kit covers the shims, seals and fasteners used to set up an existing gear set, which makes it useful when the gears are in good condition. Pinion depth and backlash decide how the teeth mesh, so measure the original shim stack before removing the pinion.
Work is best done with the carrier out of the housing on a clean bench. Record the original shim stack before removing the pinion, reuse shims only when they measure correctly, and replace the pinion seal and crush sleeve. Recheck backlash and tooth contact before final assembly, and refill with the correct gear oil when the axle is closed.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2032B |
| UPC | 631410126648 |
| Axle | Dana 30 |
| Line | Aftermarket R&P |
Vehicle fitment
Based on the product name, this kit is for the Dana 30 on 1993 to 1998 Jeep Grand Cherokee (ZJ) models. No trim-level fitment is listed.
This kit is not for the WJ Grand Cherokee from 1999 to 2004. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion depth and backlash must be set with the shims before the carrier is closed, so a shop with gear setup experience should install this gear set.
What’s included
Contents are a pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.
Not included: The ring and pinion gear set itself is not included in the kit, so plan to source it separately.






