Receiver Hitches
Showing 121–132 of 151 resultsSorted by popularity
-
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75282
- DrawTite 75282 Class III/IV rear max-frame trailer hitch
- Fits 2005–2012 Nissan Frontier and 2009–2011 Suzuki Equator
- 5000 lb GTW and 8000 lb weight distributing rating
- 500 lb tongue weight, 800 lb with weight distribution
SKU: DRA75282 -
-
Receiver Hitches
DrawTite Round Tube Max-Frame Receiver – 75193
- DrawTite 75193 Class III/IV round tube Max-Frame receiver, rear mount, part number 75193
- Fits 2004–2006 Jeep Wrangler LJ and 1997–2006 Jeep Wrangler TJ
- Rated up to 4,000 lbs. GTW, all-welded construction with a 2 inch square tube opening
- Custom built per vehicle application, attaches at all frame attachment points, no drilling required
SKU: DRA75193 -
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75151
- Rear Class III/IV max-frame trailer hitch for 2003 to 2009 Dodge Ram pickups
- Rated 5000 lbs. GTW and 8000 lbs. weight distributing
- 500 lbs. tongue weight and 800 lb. weight distributing
- Fits models without a factory installed receiver
- Part number 75151
SKU: DRA75151 -
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75135
- Rear Class III/IV max-frame trailer hitch for 2002 to 2003 Dodge Ram 1500
- Rated 5000 lbs. GTW and 10000 lbs. weight distributing
- 500 lbs. tongue weight and 1000 lb. weight distributing
- Mounts as a direct fit with no adapters
- Part number 75135
SKU: DRA75135 -
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75078
- DrawTite 75078 Class III/IV Max-Frame trailer hitch, rear mount
- Fits the 1996–2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims
- 5000lbs. GTW and 500lbs. tongue weight, with 5500lb and 550lb weight distribution ratings
- 2 Inches X 2 Inches receiver, no drilling required
SKU: DRA75078 -
Receiver Hitches
DrawTite Class III/IV Max-Frame Trailer Hitch – 75054
- Rear Class III/IV max-frame trailer hitch for 1984 to 2001 Jeep Cherokee XJ and 1984 to 1990 Jeep Wagoneer SJ
- Rated up to 3,500 lbs. GTW weight carrying and 5,500 lbs. GTW weight distributing
- 2 inch square receiver tube opening, black powder coat
- Custom built per vehicle application; drilling required
- Part number 75054
SKU: DRA75054 -
Receiver Hitches
DrawTite Front Mount Receiver – 65014
- Front mount frame mount receiver for 1992 to 1996 Ford F-250 and F-350 pickups
- 2 inch by 2 inch receiver opening
- 500 lbs. tongue weight, weight carrying
- 9000 lbs. maximum gross trailer weight, weight distribution
- Part number 65014; weight class not rated
SKU: DRA65014 -
Receiver Hitches
DrawTite Front Mount Receiver – 65005
- Front mount receiver for 1988 to 2000 Chevrolet and GMC C/K trucks, Suburbans, Blazers, Tahoes and Yukons
- DrawTite front mount receiver hitch, part number 65005
- 2 inch by 2 inch receiver, 500 lbs tongue weight, 9000 lbs maximum gross trailer weight
- All welded construction, built to fit the vehicle without adapters
- Does not fit with a roll pan
SKU: DRA65005 -
Receiver Hitches
DrawTite Class V Ultra Frame Hitch – 41933
- Class V Ultra Frame rear receiver hitch
- Rated 10000 lbs GTW and 1000 lbs tongue weight
- Weight distributing ratings of 12000 lbs GTW and 1200 lbs tongue
- Fits 2006–2008 Ford F-150, 2006–2008 Lincoln Mark LT and 2007–2012 Toyota Tundra
- No drill required, install time 20 min, part 41933
SKU: DRA41933 -
Receiver Hitches
DrawTite Class III/IV Round Tube Max-E-Loader Trailer Hitch – 41551
- Class III/IV rear round tube Max-E-Loader receiver hitch
- Rated 6000 lbs GTW and 600 lbs tongue weight
- Weight distributing ratings of 10000 lbs and 1000 lbs
- Fits the 2004–2011 Nissan Titan
- Part number 41551, UPC 742512415513, install time 15 min
SKU: DRA41551 -
Receiver Hitches
DrawTite Class III/IV Max-E-Loader Trailer Hitch – 41536
- DrawTite Class III/IV Max-E-Loader rear trailer hitch, part number 41536
- 2-inch receiver, Class III/IV
- 6000lbs. GTW and 600lbs. tongue weight carrying
- 10000lb. GTW and 1000lb. tongue weight distributing
- Listed install time of 15 min
SKU: DRA41536
Understanding hitch classes
Hitches are grouped by class according to their rated gross trailer weight and tongue weight. Class III hitches are common on SUVs, half-ton trucks and Jeeps, while Class IV and V hitches are built for heavier trailers and larger trucks. Receivers are normally 1.25 inch or 2 inch square, and Class III and above generally use 2 inch. A higher class does not raise your vehicle's tow rating, because the lowest-rated component in the whole system sets the limit.
Specifications to check
- Gross trailer weight (GTW): The maximum total trailer weight the hitch is rated for.
- Tongue weight (TW): The downward force on the ball, typically around 10 to 15 percent of trailer weight for conventional trailers.
- Receiver size: Confirm it matches your ball mount, bike rack or accessory shank.
- Weight-distributing rating: Some hitches carry different ratings with and without a weight-distribution system.
- Mount location: Rear hitches are standard, while front receivers are sold as separate designs.
Fitment and compatibility
Direct-fit hitches are made for a particular chassis, with bolt holes that line up with factory frame points. Bumper cutouts, exhaust routing, spare tire carriers and roll pans can interfere, and some listings note whether the hitch fits with a roll pan. Always confirm fitment for your exact year, make and model, and check the manufacturer's specifications and your owner's manual for the vehicle's tow rating.
Installation notes
Most bolt-on hitches install with basic hand tools and a helper, but they carry a lot of load, so fastener quality and torque matter. Use the supplied hardware, tighten to the specified torque, and recheck after the first drive. Clean and treat any weld seams or drilled areas against rust. Wiring for trailer lights is a separate harness. If you are unsure about any step, have the hitch installed by a professional, and inspect it periodically for cracks, loose bolts and corrosion.
Check the fine print when you pair a hitch with accessories. A ball mount, pin, coupler and chains each carry their own rating, and the lowest rating in the chain is your limit. Keep the receiver tube clean and lightly lubricated, and use an anti-rattle device if your accessories shift in the opening.
Wiring, ball mounts and common pairings
A hitch is only part of a towing setup. You will also need a ball mount with the right rise or drop so the trailer sits level, a ball sized to the trailer coupler, and a hitch pin or locking pin. Safety chains cross under the tongue, and trailers over a certain weight need brakes and a brake controller, with requirements that vary by state.
- Choose a ball mount length that gives clearance between the trailer and the vehicle at tight turns.
- Use a wiring harness that matches your vehicle's connector, and test the lights before every trip.
- Grease the ball lightly and keep the coupler latch free of dirt.
Look over the receiver for rust and bent tubing after trail use, and replace any hitch that shows cracks or elongated bolt holes.
Popular Receiver Hitches brands
- Curt Manufacturing (67)
- DrawTite (47)
- B&W Hitch (16)
- Rugged Ridge (7)
- Smittybilt (4)
- Warn (3)
- Fab Fours (2)
- Trimax Locks (2)
- Rampage (1)
- Genuine Packages (1)
- RT Off-Road (1)
- Ranch Hand (1)
Receiver Hitches FAQ
What hitch class do I need?
Match the class to the trailer you plan to tow, then confirm it does not exceed your vehicle's rated towing capacity. Class III suits many SUVs and Jeeps, while heavier trailers call for a higher class on a capable vehicle.
Does a Class V hitch increase my towing capacity?
No. Towing capacity is set by the vehicle manufacturer and by the weakest component, including the frame, axle, brakes and hitch. A stronger hitch alone does not raise the vehicle's limit.
What is tongue weight?
Tongue weight is the downward force the trailer places on the hitch ball. For many conventional trailers it should fall near 10 to 15 percent of trailer weight, and it must stay within the hitch's rating.
Can I install a receiver hitch myself?
Many direct-fit hitches bolt to existing frame holes and can be installed at home with a helper and a torque wrench. If drilling, welding or trimming is involved, a professional installer is recommended.











