Hitches
Showing 49–60 of 200 resultsSorted by popularity
-
Receiver Hitches
Curt Manufacturing Class V 2″ Xtra-Duty Receiver Hitch – 15324
- Fits 2003–2006 Cadillac Escalade, Chevrolet Avalanche, Suburban and Tahoe, GMC Yukon and Yukon XL
- Class V Xtra-Duty 2 inch receiver for heavy-weight trailers
- Part number CRT15324, direct fit
- Gloss Black Powder Coat finish; installation hardware supplied
SKU: CRT15324 -
Receiver Hitches
Curt Manufacturing Class V 2″ Xtra-Duty Receiver Hitch – 15300
- Class V Xtra-Duty rear receiver hitch with a 2 Inches X 2 Inches receiver
- Fits Dodge trucks from 1967 to 2002 and Ford trucks from 1973 to 1997
- Installation hardware included
- Gloss Black Powder Coat finish; does not fit with a roll pan
- Part number CRT15300
SKU: CRT15300 -
Receiver Hitches
Curt Manufacturing Class V 2″ Receiver Hitch – 15804
- Commercial Duty Class V receiver hitch, part CRT15804, fits 2020–2021 Ford F-350 Super Duty
- Rated 20,000 pounds gross trailer weight and 2,700 pounds tongue weight
- Weight distribution rating of 20,000 pounds WD and 2,700 pounds WDTW
- Grade-8 hardware and carbide black powder coat over an A-coat base
- Receiver size needs checking: specs list 2 inches, description cites 2-1/2 inches
SKU: CRT15804 -
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14374
- Fits 2009–2010 Dodge Ram 1500 and 2011–2018 Ram 1500 pickups, plus the 2019 Ram 1500 Classic (listed trims)
- Rear-mount Class IV receiver with a 2 inches x 2 inches opening
- Part number CRT14374, weight class Class III/IV
- Gloss Black Powder Coat finish; installation hardware supplied
SKU: CRT14374 -
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14361
- Dodge Ram 1500, 2500 and 3500 pickups, 2002–2018 model years (see fitment)
- Rear-mount Class IV receiver with a 2 inches x 2 inches opening
- Part number CRT14361, weight class Class III/IV
- Gloss Black Powder Coat finish, installation hardware included
SKU: CRT14361 -
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14355
- Direct-fit Class IV receiver hitch
- Fits 1997–2003 Ford F-150, 2004 F-150 Heritage, 1999–2003 F-150 Lightning, and F-250 and F-350 Super Duty trucks
- Gloss Black Powder Coat finish
- Installation hardware included, no drilling required
- Part number CRT14355
SKU: CRT14355 -
-
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14081
- Fits many 1988–2000 Chevrolet and GMC C/K pickups, plus several R and V models (see fitment)
- Rear-mount Class IV receiver with a 2 inches x 2 inches opening
- Part number CRT14081, weight class Class III/IV
- Gloss Black Powder Coat finish with installation hardware included
- Does not fit with a roll pan
SKU: CRT14081 -
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14062
- Fits 2011–2014 Chevrolet Silverado 2500 HD, 2011–2014 GMC Sierra 2500 HD and 2011–2013 GMC Sierra 3500 HD (listed fitment)
- Rear-mount Class IV receiver hitch with a 2 inches x 2 inches receiver
- Weight class Class III/IV; part number CRT14062
- Gloss Black Powder Coat finish with installation hardware included
- Not compatible with a roll pan
SKU: CRT14062 -
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14061
- Direct-fit rear receiver hitch with a 2 Inches X 2 Inches receiver
- Fits 2011–2014 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks
- Weight Class III/IV; does not fit with a roll pan
- Gloss Black Powder Coat finish
- All installation hardware included, no drilling required
- Part number CRT14061
SKU: CRT14061 -
Receiver Hitches
Curt Manufacturing Class IV 2″ Receiver Hitch – 14001
- Curt Class IV rear receiver hitch, part number CRT14001, with a 2-inch by 2-inch receiver
- Includes all installation hardware; no drilling required
- Fits many 1967–2002 Dodge and Ford pickups and Bronco models
- Gloss Black Powder Coat finish
SKU: CRT14001 -
Receiver hitch basics
A receiver hitch is a steel frame that bolts to the tow vehicle and presents a square opening for a ball mount, bike rack, or cargo carrier. Classes describe capacity and opening size. Class II typically uses a 1-1/4 inch receiver, while Class III, IV, and V commonly use 2-inch or larger openings with progressively higher ratings.
Most hitches here are vehicle-specific, which means the mounting points, bracket shape, and tailpipe clearance are designed for a given model. Multi-fit styles cover several vehicles but may need more care during installation.
Gooseneck and fifth wheel
Gooseneck and fifth wheel hitches mount to the truck frame under the bed and carry weight over or just ahead of the rear axle, which improves stability for heavy trailers. Look for in-bed ball mounts, install kits that fit your truck's frame, and handles, wedges, or adapters for existing rails.
Install kits and brackets are usually specific to a truck make, cab, and bed length. Compare part numbers carefully before choosing.
Choosing the right rating
- Check the vehicle's maximum tow rating and tongue weight rating in the owner's manual.
- Pick a hitch whose rated capacity meets or exceeds your trailer, but remember the lowest rating in the system governs.
- Consider weight distribution and sway control when trailer weight approaches the vehicle's limit.
- Look at features such as roll pan clearance, finish, and whether wiring is included.
Installing safely
Many hitches bolt into factory frame holes without drilling, though some need exhaust or bumper adjustments. Use the torque values the manufacturer specifies, support the hitch while you tighten fasteners, and recheck bolts after your first towing trips. For gooseneck and fifth wheel gear, professional installation is a sound choice because bed drilling and frame bracing are involved. Confirm fitment for your exact year, make, and model.
Pre-trip checks and common mistakes
A hitch is only as safe as its last inspection. Look over the welds and finish for cracks or rust, confirm every bolt is tight, and make sure the pin and clip are the correct size for the receiver. A loose-fitting ball mount can rattle, so some owners use an anti-rattle device or locking pin.
Common mistakes include forgetting to count the weight of cargo in the trailer, using a 1-1/4 inch receiver for loads that need a 2-inch one, and ignoring the ball height. Keep a written record of your vehicle's and trailer's ratings in the glovebox.
It also helps to know the parts around the hitch. A ball mount slides into the receiver and is secured by a pin and clip. The ball threads into the mount, and its shank diameter, commonly 3/4, 1, or 1-1/4 inch, must match the hole in the mount. The ball diameter, often 1-7/8, 2, or 2-5/16 inches, must match the trailer coupler. Check the rating stamped on each part.
Wiring is separate from the hitch. Most trailers use a 4-pin or 7-pin connector, and adapters are common. Safety chains should cross under the tongue and attach to the vehicle's chain loops, not the ball mount.
Finally, think about corrosion. Hitches live under the rear bumper where road salt and water collect. Touch up chips with paint, keep the receiver interior lightly greased, and pull the pin occasionally so it does not seize in place.
Popular Hitches brands
- Curt Manufacturing (92)
- DrawTite (48)
- B&W Hitch (33)
- Rugged Ridge (7)
- Smittybilt (5)
- Warn (3)
- Reese (3)
- Trimax Locks (2)
- Pro Series (2)
- Fab Fours (2)
- Fastway Trailer Products (2)
- Street Scene (1)
Shop Hitches by type
- Receiver Hitches (151)
- Weight Distributing Hitch (8)
- Gooseneck Trailer Hitch Ball (7)
- Fifth Wheel Trailer Hitch Head Unit (6)
- Fifth Wheel Trailer Hitch (3)
- Trailer Hitch Adapter (2)
- Weight Distributing Hitch Sway Control (1)
- Fifth Wheel Trailer Hitch Handle (1)
- Fifth Wheel Trailer Hitch Wedge (1)
Hitches FAQ
What is the difference between Class III and Class IV hitches?
Both usually use a 2-inch receiver, but Class IV has a higher rating than Class III. Exact ratings vary by manufacturer and by whether you use weight distribution, so check the specifications on the product and your vehicle's own tow rating.
Will a hitch fit with a roll pan?
Not always. Some hitches are designed to clear a roll pan and others are not. Listings sometimes state this directly. Check the fitment notes, and confirm against your exact year, make, and model.
What does a weight distributing hitch do?
It uses spring bars to spread part of the tongue weight to the tow vehicle's front axle and the trailer axles. This helps level the vehicle and can improve steering feel and braking when towing heavier trailers.
Can I install a hitch myself?
Many bolt-on receiver hitches are manageable with basic tools, a torque wrench, and a helper. Gooseneck and fifth wheel installs are more involved and often benefit from professional installation. Follow the maker's instructions and torque specifications.











