Overview
The B&W Tow & Stow 3-inch receiver hitch in black, part number BNWTS30049B, is a rear-mounted receiver hitch with a 3 by 3 inch receiver size. It stows under the vehicle when not in use, and it is adjustable in 1-inch increments so the trailer can sit level.
It is designed to fit 2-inch, 2.5-inch and 3-inch receivers. It is rated for 21,000 pounds gross vehicle weight and 2,100 pounds vertical tow weight. It is a universal fit, so it is not tied to a particular make, model or year. It suits owners who swap between a work trailer and a camper or hobby trailer, in place of several ball mounts.
The Tow & Stow is intended to replace a set of separate ball mounts for owners who switch between a work trailer and a camper or hobby trailer. That makes it useful for households that tow different loads with the same vehicle.
Key features
- Rear-mounted 3 by 3 inch receiver size
- Fits 2-inch, 2.5-inch and 3-inch receivers
- Adjustable in 1-inch increments for a level towing setup
- Stows under the vehicle when not in use
- Black powder-coat finish designed to resist corrosion.
- Built from high-yield tubing
- Covered by a limited lifetime warranty.
Adjusting for a level trailer
Level towing keeps the trailer’s weight evenly spread between the axles and the tow vehicle, which helps steering, braking and tire wear. Hitches that adjust in small steps let you set the ball height to the trailer’s ride height instead of accepting a fixed drop. Check the level each time the load or trailer changes.
Changing the setup means moving the height settings and then rechecking the ball and coupler alignment. Stow the hitch fully before driving on rough terrain so the adjustment does not shift. Look over the adjustment pins and the receiver tube for wear at each service interval.
- Measure the trailer level before each trip
- Recheck settings after changing the load
- Inspect adjustment pins for bending or wear
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | BNWTS30049B |
| Model code | TS30049B |
| Position | Rear |
| Receiver size | 3 inches x 3 inches |
| Compatible receivers | 2-inch, 2.5-inch and 3-inch |
| Gross vehicle weight accommodated | 21,000 pounds |
| Vertical tow weight accommodated | 2,100 pounds |
| Adjustment | 1-inch increments |
| Tubing | High-yield |
| Finish | Black powder-coat, corrosion-resistant |
| Warranty | Limited lifetime |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit, so no particular year, make or model is matched. Check the 3 by 3 inch receiver size, the 21,000 pound gross vehicle weight and the 2,100 pound vertical tow weight against your own vehicle and trailer before ordering.
A universal-fit hitch still needs a clearance check at the bumper, exhaust and trailer coupling. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjust the hitch in 1-inch increments until the trailer sits level, and recheck the setup before each trip. Keep the ball mount fully seated in the receiver, and make sure the hitch is stowed fully before driving on rough ground. Do not exceed the towing ratings in your vehicle owner’s manual, whichever is lower.
What’s included
Check the package contents against your installation before starting.
Not included: Confirm whether a ball mount and trailer ball are needed for your setup.










