Overview
The Curt Manufacturing CRT13901 is a Class III rear trailer hitch with a 2 in x 2 in receiver, built as a multi-fit hitch rather than a vehicle-specific one. It is a universally designed alternative to custom hitches. Its sliding or adjustable frame is set to match the width of the vehicle’s frame.
Multi-fit hitches like this one are generally used on mid-size and full-size pickup trucks and SUVs. The receiver suits utility trailers, single-horse livestock trailers, boat trailers and large campers, as well as cargo carriers and bike racks. With a weight distribution system, the stated ratings rise to 7,500 lb gross trailer weight and 750 lb tongue weight.
Key features
- Sliding or adjustable frame matches the width of the vehicle’s frame
- 2 in x 2 in receiver tube opening
- Rated for 5,000 lb gross trailer weight and 500 lb tongue weight
- With weight distribution, up to 7,500 lb gross trailer weight and 750 lb tongue weight
- Class III/IV weight class
- Does not fit with a roll pan
Setting up a multi-fit frame
A multi-fit hitch relies on the frame adjustment to sit square and secure on your vehicle. Measure the frame width at the mounting points before setting the sliding frame, then tighten all fasteners in the sequence the setup calls for. A loose or off-center frame can rub, wear the mounting holes and change how the load is carried through the bumper area.
Multi-fit hitches are often paired with weight distribution, sway control and a ball mount sized to the trailer. Use a ball mount that matches the 2 in x 2 in receiver and the trailer coupler, and keep the pin clips secure. Inspect the frame, welds and hardware after the first few trips, since shifting loads can loosen fasteners over time.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13901 |
| Front or rear | Rear |
| Receiver size | 2 in x 2 in |
| Weight class | Class III/IV |
| Gross trailer weight | 5,000 lb |
| Tongue weight | 500 lb |
| Gross trailer weight with weight distribution | 7,500 lb |
| Tongue weight with weight distribution | 750 lb |
| Roll pan compatibility | Does not fit with roll pan |
| Fitment type | Universal fit |
Vehicle fitment
This hitch is a universal fit rather than a vehicle-specific part. Because the frame must be set to your vehicle’s width, check that width against the hitch before choosing it.
Custom-fit CURT hitches are a separate line designed for specific vehicles. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the sliding frame to match your vehicle’s frame width before tightening. Never exceed the lowest weight capacity of any towing component, including when the weight distribution ratings are used.
What’s included
Check the included hardware against your installation before starting.
Not included: a ball mount and a trailer, which are needed to tow.









