Overview
The B&W Tow & Stow 2-1/2-inch drop down pintle hitch in black, part number BNWTS20055, is a rear-mounted pintle hitch with a 2.5 by 2.5 inch receiver size. The drop down design stows under the vehicle when not in use, which keeps the hitch out of the way between tows.
The pintle hitch shares several features with the Tow & Stow receiver hitch line. It works with a pintle-hook trailer coupling, so confirm your trailer uses that type before hooking up. It is a universal fit and is built from sturdy materials.
Key features
- Drop down pintle hitch design in black
- Stows under the vehicle when not in use
- Shares several features with the Tow & Stow receiver hitch line
- 2.5 by 2.5 inch receiver size
- Universal fit
Pintle hook towing basics
A pintle hitch uses an open-throat hook that the trailer’s pintle eye or lunette ring drops over, so the hook and coupling must match before towing. Pintle setups are common for work trucks and equipment hauling, and they are often used alongside ball and receiver systems rather than in place of them.
Before each tow, confirm the coupling is secured with its latch or pin, and that the trailer’s safety chains are attached to the hitch frame. Inspect the hook for wear at its throat and the pivot pin for play, since a worn hook can allow the trailer to lift off under load. Greasing the pivot, where the design allows it, keeps movement smooth.
- Match the hook to the trailer’s pintle eye size
- Check the latch and pivot pin before every tow
- Keep the safety chains connected to the hitch frame
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | BNWTS20055 |
| Model code | TS20055 |
| Hitch type | Drop down pintle hitch, 2-1/2-inch |
| Position | Rear |
| Receiver size | 2.5 inches x 2.5 inches |
| Finish | Black |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit, so it is not tied to a particular year, make or model. Check its 2.5 by 2.5 inch receiver size against your vehicle before choosing it.
Universal fit does not confirm clearance for your bumper, exhaust or trailer coupling. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stow the hitch before driving, and drop it fully into towing position before connecting a trailer. Check that the pintle hook and the trailer coupling are matched before every tow.
What’s included
Check the included hardware against your installation plan before starting.
Not included: A pintle-hook trailer or its coupling is not included with the hitch.









