Overview
The Curt Manufacturing CRT31008 is a 2-inch front receiver hitch for Ford Super Duty trucks. It gives the front of the vehicle a standard 2 in x 2 in receiver tube, so you can mount a winch, a snow plow, a cargo carrier or a bike rack while the rear hitch stays free for a trailer. It fits 2008–2010 Ford F-250 Super Duty and F-350 Super Duty trucks.
CURT builds each front hitch to one vehicle, so the frame shape, bracket positions and mounting holes are matched to the truck. The hitches are made from American steel and are designed, manufactured, finished and tested in the USA. A ball mount in the front receiver can also be used to hitch a trailer and push it at a boat landing or into a tight parking spot.
Key features
- 2 in x 2 in receiver tube accepts standard 2-inch shank accessories
- Rated for 5,000 lb gross trailer weight and 500 lb tongue weight
- Tested to SAE J684 safety standards
- Rated for 9,000 lb straight-line pull for recovery towing and winch use
- Welded steel collar for added strength and an open back for easy cleaning
- Accepts a hitch tube cover when not in use to keep out water, dirt and debris
- Co-cured liquid A-coat and black powder coat finish resists rust, chipping and UV damage
Front hitch loads and care
A front receiver sees loads that differ from a rear hitch, including the pulling force of a winch and the push of a plow blade. Those forces run through the frame mounts, so check the hitch and its welds for cracks, bent tubing or loose hardware after heavy use. Keep the receiver covered when it is empty so water and road grime do not build up inside the tube.
Accessories are the other half of the setup. A winch mount, plow mount or bike rack should match the 2-inch receiver and be rated for the load it carries. Mismatched pins or worn clevis holes can allow movement that rattles and wears the receiver, so swap in a fresh pin when one shows wear. A professional installer is useful when a front hitch carries a plow or winch.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT31008 |
| Hitch position | Front mount |
| Receiver tube | 2 in x 2 in |
| Gross trailer weight | 5,000 lb |
| Tongue weight | 500 lb |
| Straight-line pull | 9,000 lb |
| Testing standard | SAE J684 |
| Finish | Co-cured liquid A-coat and black powder coat |
| Construction | American steel, welded steel collar, open-back receiver |
| Included | All necessary mounting hardware |
Vehicle fitment
It fits 2008–2010 Ford F-250 Super Duty and 2008–2010 Ford F-350 Super Duty in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. Confirm fit for your vehicle’s year, model and trim before ordering. Super Duty years outside 2008–2010 and the F-450 and F-550 are not covered here.
Super Duty years outside 2008–2010, and the F-450 and F-550, are not covered by the list above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hitch comes with all necessary mounting hardware for a complete installation. Because a front receiver carries winch and plow loads, a professional installer is a sensible choice for this hitch.
What’s included
All necessary mounting hardware for a complete installation.
Not included: winch mount, hitch step, skid plate, spare tire mount, license plate holder, snow plow, ball mount or tow hook. These are separate front-hitch accessories that fit the 2-inch receiver.












