Overview
The CURT Custom Towed-Vehicle RV Wiring Harness, part number CRT58963, is a vehicle-specific dinghy tow harness that connects a towed Jeep Cherokee to an RV. It is designed for the 2019–2021 Jeep Cherokee and uses the vehicle’s existing lights, so they work alongside the RV’s lights while the Cherokee rides behind the motorhome.
Rather than cutting or splicing into the vehicle’s electrical system, the harness uses OEM-compatible plugs that tap into the existing wiring. The 4-way flat connector runs from the front of the vehicle to the RV’s 4-way flat socket, so hitching up is fast once the harness is installed. Each CURT towed-vehicle RV harness is made for a specific application and built for lasting durability. The vehicle’s lights signal other drivers and function just like a standard trailer in tow, so no additional lighting is needed.
Key features
- Vehicle-specific design for the 2019–2021 Jeep Cherokee
- Plug-and-play installation using OEM-compatible plugs
- No cutting or splicing of the vehicle’s wiring
- Uses the towed vehicle’s existing tail lights, turn signals and brake lights
- Integrated block diodes isolate vehicle electronics from RV signals
- 4-way flat extension reaches the RV connector socket
- Mounting bracket keeps wires ordered and protected on the vehicle
Preparing for dinghy towing
Dinghy towing means the Cherokee rolls behind the motorhome with all four wheels on the ground, so the vehicle’s own lights and brakes are part of the setup. Confirm that the vehicle is approved for this kind of towing before hitching up, and make sure the transmission and drive system are set up for it. The block diodes help keep the vehicle’s electronics separate from the RV’s signals, which reduces the chance of unwanted interactions.
Before each trip, check the plugs, the 4-way flat extension and the mounting bracket for wear or loose fasteners. Test the lights, turn signals and brakes at the RV connection, and check that the wiring stays clear of the tow hitch and the ground. Disconnect the vehicle battery before any wiring work, and keep the bracket hardware tight after the first few drives.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT58963 |
| Product type | Towed-vehicle RV wiring harness for dinghy towing |
| Connector | 4-way flat |
| Signal isolation | Integrated block diodes |
| Included hardware | Mounting bracket and all necessary installation hardware |
Vehicle fitment
The 2019–2021 Jeep Cherokee is covered in these trims: 80th Anniversary, Altitude, High Altitude, Latitude, Latitude Lux, Latitude Plus, Limited, Overland, Trailhawk, Trailhawk Elite and Upland.
Cherokee years outside 2019–2021 and other Jeep models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation connects the harness to the vehicle’s existing wiring through the OEM-compatible plugs, with no cutting or splicing. Use the mounting bracket to keep the wires ordered and protected on the vehicle. Disconnect the vehicle battery before working on its wiring.
What’s included
The kit includes the towed-vehicle RV harness, a 4-way flat extension to reach the RV connector socket, a mounting bracket and all the necessary hardware for a complete installation.














