Overview
The Pro Comp 924502 is an ES9000 Series twin tube shock absorber with a nitrogen gas charged cellular gas design. Its lengths are vehicle specific, and it uses factory upper and lower mounts, so the installed length is set by the vehicle.
The 10 stage velocity sensitive valving supports a smooth, comfortable highway ride. The shock has a nitrogen gas charged cellular design built for heavy loads, with strong construction and long lasting durability, and it is sold as each.
The shock is not adjustable and has no remote reservoir. It has a white finish and no boot.
Key features
- Twin tube nitrogen gas charged cellular design
- 10 stage velocity sensitive valving
- Factory upper and lower mounts
- Optimum capacity for heavy loads
- Maximum strength and long lasting durability
Factory mounts and bushings
Factory mounts keep the shock in the same place the original used, so the vehicle’s geometry stays close to stock. Over time the rubber bushings in those mounts can crack, harden or collapse, and that wear makes the shock knock or feel loose. Replacing worn bushings while the shock is out is a simple step that keeps the new unit working as intended.
When a shock is replaced with factory mounts, check that the bushings and hardware match the old set. Bent brackets or stretched bolt holes can change the angle of the shock and shorten its life. Look for cracked rubber, rust on the bracket and loose fasteners, and tighten all hardware to the vehicle’s own values once the wheels are back on the ground.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924502 |
| UPC | 614901924503 |
| Shock series | ES9000 Series |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot | Not included |
| Sold as | Each |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Because the mounts are factory mounts, measure the original shock and match it to this one before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES9000 Series shock absorber, sold as each, with no boot.












