Select your vehicle
-13%

Pro Comp ES9000 Series Shock Absorber – 922511

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • ES9000 Series gas charged twin tube shock, sold as each
  • Extended length 22.75 in, collapsed length 13.54 in, travel 9.21 in
  • Factory upper and lower mounts, white finish
  • Check the mounts and lengths against the current shock before buying
  • Shock boot not included

Description

Overview

The Pro Comp 922511 is a gas charged ES9000 Series shock absorber with a twin tube body, sold individually. Its extended length is 22.75 inches and its collapsed length is 13.54 inches, with 9.21 inches of travel between them. The upper and lower mounts are factory style.

Compare the lengths and mounting points with the shock on your vehicle before ordering.

Key features

  • Gas charged twin tube design
  • 10 stage velocity sensitive valving
  • 1 3/8 inch nylon banded full displacement piston head
  • Double welded shock mounts
  • Factory-style upper and lower mounts

Before fitting a new shock

Before fitting any gas charged shock, inspect the old unit’s mounts and bushings, since they carry the load and set the angle the shock works at. A bent bracket or a seized bushing will affect the new shock as much as the old one. Clean the stud or eye and replace any hardware that shows wear.

Once the new shock is in place, cycle the suspension by hand and watch for binding at full compression or extension. Tighten the fasteners to the value in your service manual after the first drive, since new bushings settle. Keeping the old hardware in a safe place makes it easy to compare the parts later.

  • Inspect mounts and bushings first
  • Clean the stud or eye before fitting
  • Recheck fasteners after the first drive

Specifications

Brand Pro Comp Suspension
Part number 922511
UPC 614901145021
Shock series ES9000
Extended length 22.75 in
Collapsed length 13.54 in
Travel length 9.21 in
Upper mount Factory
Lower mount Factory
Gas charged or hydraulic Gas charged
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

Measure your current shock before choosing this length, since lengths close to 22.75 inches do not confirm fit. Confirm your vehicle’s year, model and trim before buying.

Lengths close to 22.75 inches are not proof of fit, because the mounting position matters too. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One shock absorber, sold as each. The shock boot is not included.

SKU: EXP922511 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

What truck does the Pro Comp 922511 fit?

Fit depends on the shock being replaced. Compare its 22.75 inch extended and 13.54 inch collapsed lengths and factory mounts with the shock on your truck before ordering.

Is the 922511 a front or rear shock?

Position is set by the shock it replaces. Check whether the shock you are replacing is a front or rear unit, because the factory mounts should line up with the original.

Does the 922511 include a boot?

No. The shock boot is not included, and the shock is sold individually, so a separate boot is needed for each one.

Should I replace shock boots when fitting a new shock?

Inspect the boot on the old shock and replace it if it is cracked or torn. A boot keeps grit off the piston rod and seals. Since boots are not included, buy one for each shock you install.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon