Overview
It is a rear ES9000 Series gas charged shock absorber for the 2007 to 2012 Toyota FJ Cruiser, sold individually. It is made for the Base, TRD Special Edition and Trail Teams Special Edition versions.
Pro Comp rates this rear shock for a 2 to 3 inch lift. Its extended, collapsed and travel lengths are vehicle specific, so measure the stock rear shock before ordering. Both mounts are factory style, and the twin tube body uses a nylon banded piston head with 10 stage velocity sensitive valving.
Key features
- Rear position for the Toyota FJ Cruiser
- Gas charged twin tube design
- 10 stage velocity sensitive valving
- 1 3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
Rear shock on an FJ Cruiser
The rear shocks on a short-wheelbase off-roader carry a lot of the load during climbs and braking, so their condition shows up quickly in ride quality. Because the lengths for this part vary by vehicle, measure the stock shock on your own truck before deciding, and compare the stroke as well as the overall length.
Rear shocks are usually replaced as a pair, since mismatched damping can make the back of the vehicle feel unsettled on washboard or pavement. When a lift is planned, check that the rear height falls within the lift range and that the mounts still clear the body and brake lines. Inspect the rubber bushings at each eye at the same time.
- Measure the stock rear shock first
- Replace rear shocks in pairs
- Check rear height against the lift range
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 923553 |
| UPC | 614901696394 |
| Shock series | ES9000 |
| Position | Rear |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Gas charged or hydraulic | Gas charged |
| Lift range | 2 to 3 in |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 2007 to 2012 Toyota FJ Cruiser in Base, TRD Special Edition and Trail Teams Special Edition versions.
Other Toyota 4×4 models, and FJ Cruiser years outside 2007 to 2012, are not on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lengths are vehicle specific, measure the stock rear shock on your FJ Cruiser and compare it before ordering. The 2 to 3 inch lift rating is the figure to check against your rear height.
What’s included
One rear shock, sold as each. A boot is not part of the sale.










